Research integrity
Editorial Standards & Integrity Policy
How Repair Cost Atlas sources its figures, rates its confidence, handles corrections, and keeps planning estimates separate from contractor quotes and from any commercial interest.
01
Independence and funding
Our guides explain published cost information and project variables. We do not recommend contractors or claim that our estimates replace written proposals.
Repair Cost Atlas does not operate a contractor referral service or sell leads. Today the site carries no advertising, affiliate links or sponsored content, so the guides earn no revenue. If that changes, the advertising disclosure will be updated first.
02
Strict separation between editorial and advertising
Advertising is currently disabled on the site. If advertising is introduced later, it will be clearly labeled and kept separate from editorial content.
- Commercial relationships will not determine the cost ranges or conclusions in our guides.
- Paid placement will not be presented as an editorial recommendation.
- Ads are never disguised as editorial content, calculator results, or recommendations.
03
Sourcing standard: no fabricated figures, reviews or credentials
Every price in a guide is taken from a published source, calculated from one with the inputs named, or labeled as our planning estimate. The cost figures come from consumer cost publishers (Fixr, This Old House, HomeGuide, Bob Vila and Angi / HomeAdvisor, which count as one publisher); Bureau of Labor Statistics wages are used only for the ZIP code labor adjustment; government and technical references explain rules and specifications. Each guide lists the sources it relies on, and the sources page shows what each one supports and which guides cite it.
We do not publish fake contractor interviews, invented quotes, reviews or testimonials, or "expert verified" badges, and we do not present anyone as a reviewer or credentialed expert unless that person actually reviewed the page. When we find a figure that falls short of this standard, we correct it and log the change below.
04
Confidence ratings
Each guide rates its typical range High, Medium or Low. High means three or more independent publishers support it and agree within roughly ±20%; Medium means two publishers, or three or more that disagree more than that; Low means one publisher, or a range we synthesized or modeled. Angi and HomeAdvisor count as one publisher. The full rule is in the methodology.
05
Correction and update policy
If you find outdated pricing, a figure that its cited source does not support, or a statement that is wrong, email contact@repaircostatlas.com with the guide URL, the figure or sentence, and a link to the source you are comparing it with. See contact for what to include.
- We check the report against the source the guide cites and, where useful, against the other publishers.
- When the issue is confirmed, we correct the guide, add a dated entry to its change log saying what changed, and move its “Updated” date.
- Corrections are not made silently: every change-log entry also appears in the corrections log below.
06
Corrections log
Every dated change-log entry from the guides, newest first. Each guide shows its own entries under “What changed”.
- AC Compressor Replacement Cost
Typical range now Fixr's published $800 to $2,800 with the $1,550 average reported by Fixr and This Old House. The compressor part now shows Fixr's full $400 to $1,800, labor uses Fixr's $600 to $1,200 labor-and-refrigerant figure, refrigerant is $50 to $120 per pound across Fixr's pages, and unpublished permit and disposal allowances were removed. Added answers on failure signs, job length, repairing R-410A and R-22 systems, and timing.
- AC Unit Replacement Cost
Typical range now Fixr's published $5,500 to $10,000 for a 3-ton replacement on existing ducts (average shown is its midpoint); the earlier $4,800 to $9,500 band and $3,500 low end were not published by any source. Confidence lowered to medium. Fixr's repair-or-replace rule corrected, SEER cards show SEER2, and new answers cover refrigerants (R-454B, R-32, R-22), signs, job length, permits and the best time to replace.
- Air Duct Cleaning Cost
High end raised to This Old House's $1,200 for a 3,000 sq ft home. Add-on prices that Angi's data does not contain were replaced with Fixr's published figures (dryer vent about $140, mold remediation $1,000 to $5,000) or removed (furnace cleaning, duct coating, a permit fee). Size rows now use Fixr's published table. Added EPA's advice that ducts be cleaned only when needed, and answers on warning signs and how long cleaning takes.
- Air Duct Replacement Cost
One price for the average home: typical range now Angi's published $2,000 to $4,500 for a 2,000 sq ft home, with an average of $3,400 labelled as the midpoint of This Old House's 200-foot price. The unpublished $1,800 and $1,200 figures were removed; the high end is This Old House's 500-foot price ($9,300), now shown as a row. Labor rate corrected to Fixr's $75 to $200 per hour. Added answers on signs, job length, insurance and permits.
- Asphalt Shingle Roof Replacement Cost
Typical range and average re-based on Fixr's published $8,000 to $16,000 and $12,000; the previous $6,000 to $15,000 and $9,800 were not published by any source, and the claim that published averages bracket them was false. One price per roof size (architectural shingles at Fixr's $4 to $8 per sq ft). New labor section with published per-square, per-sq-ft and hourly prices; overlay answer re-sourced and unsupported code and warranty claims removed.
- Evaporator Coil Replacement Cost
Corrected two misattributed figures: the $800 "condenser coil" price was Angi's uncased evaporator coil, and a $850 3-ton coil price was not in Angi's data. Angi and HomeAdvisor are now presented as one source. Added This Old House's evaporator coil prices and answers on failure signs, refrigerant compatibility (R-410A, R-454B, R-32, R-22) and timing.
- Furnace Repair Cost
Typical range now Fixr's published 2026 furnace repair range ($150 to $600, $350 to $400 average) instead of our $150 to $650 planning band; low and high ends now Fixr's $66 and $2,673. The unpublished $300 to $750 major-part row was replaced by Fixr's control board price. Added a furnace-vs-water-heater answer for "heater repair" estimates and answers on failure signs, warranty and timing.
- Furnace Replacement Cost
Typical range now Fixr's published $2,800 to $7,500 ($4,800 national average) rather than a blend of three publishers that likely share data. Duct and removal figures that Angi does not publish were replaced with Fixr's prices, and labor time now uses Fixr's 4 to 10 hours. Added DOE's 95% AFUE furnace standard (from December 18, 2028) and answers on signs, job length, permits and the best time to replace. The furnace-and-AC answer now focuses on the furnace side and points to the AC guide instead of repeating it.
- Garbage Disposal Replacement Cost
Re-read Fixr: electrician rates now $40 to $120 per hour (Fixr) instead of an unverified $50 to $100 credited to HomeAdvisor, with Fixr's outlet price, installation time, lifespan and replacement signs added. Aluminum and stainless steel prices relabeled because HomeAdvisor does not say whether installation is included. The feed-type answer now explains how the sources disagree. Angi and HomeAdvisor cited as one source.
- Gas Line Installation Cost
Full range now shows Fixr's published extremes ($200 to $5,000) instead of our calculated $260 to $2,125. Pipe prices by material now use Fixr's installed per-foot figures; the earlier per-material prices were not in the cited Angi data and showed copper cheaper than CSST. Removed an unsourced $500 pressure test and "up to $300" inspection; added Fixr's test, inspection, permit and new-service figures, job time and who may install. Length rows labeled as our calculation for the pipe run only.
- Gas Water Heater Replacement Cost
Corrected the Department of Energy figure: $2,241 is the highest efficiency level in DOE's cost table, not a "condensing" model, and DOE says its 2024 rule does not require a condensing gas tank; added the rule's May 2029 compliance date. Hours and hourly rate now use Fixr's published figures (2 to 3 hours, $45 to $200 per hour). Anode rod price now from Fixr instead of a 2022 Bob Vila page. Added replacement signs, lifespan and permit answers; size-table averages labeled as calculated midpoints.
- Heat Pump Replacement & Installation Cost
Added what changed with refrigerants (R-454B and R-32 in new systems since 2025, servicing existing R-410A and R-22 systems), from EPA and ACHR News. Cold-climate models are no longer tied to SEER2 price bands without a source. HomeGuide's range was dropped because the page could not be re-checked. Added answers on signs, permits and the best time to replace.
- HVAC Blower Motor Replacement Cost
Typical range corrected to Angi's published PSC and ECM installed prices ($350 to $1,150, $560 average); the earlier $450 to $1,200 band was not published by any source. Low and high ends now come from Fixr ($300 to $2,000). Size rows are labelled as our calculation. Added answers on failure signs, job length, warranty coverage and timing.
- Main Water Line Replacement Cost
Full range now starts at Fixr's $750 for 10 feet, matching the length table and calculator (it started at $1,125). Repair row now shows Fixr's $500 to $2,000, with HomeAdvisor's leak repair figure as a comparison, instead of joining the two. Labor rate now Fixr's published $75 to $150 per hour. Added what EPA's 2024 Lead and Copper Rule Improvements mean for a lead service line (no cost figures), plus insurance and warning-sign answers from Fixr; the responsibility answer no longer states a rule the sources do not publish.
- Metal Roof Cost
Typical range and average re-based on Fixr's published $14,400 to $38,400 and $26,500 for a 2,400 sq ft steel roof; the previous $10,500 to $28,500 and $17,200 were not published by any source. Size table recalculated at Fixr's steel price per sq ft and labelled. Cost components now use published labor shares and tear-off prices; the unsourced code claim about installing over shingles was replaced with what Fixr and HomeGuide say.
- Mini Split Installation Cost
The summary now shows the higher independent figures (Fixr's $6,357 average and This Old House's $8,221 ductless replacement) next to Angi's $2,000 to $5,000. Bob Vila's figures come from Angi and HomeAdvisor, so they are no longer presented as a second source, and confidence is now low (one publisher behind the typical range). Low end lowered to the published $500 one-zone price, labor uses published figures, and new answers cover refrigerants (R-32, R-454B), permits and timing.
- Roof Decking Replacement Cost
The $5 average is now labelled as the midpoint of Fixr's range. HomeGuide's $2 to $5 per sq ft added as a second independent publisher (confidence raised from low to medium under the documented rule). Labor hours are now per 4x8 sheet and calculated from Fixr's published labor price.
- Roof Repair Cost
Typical range and average now Fixr's published $400 to $1,900 and $1,150 (previously a rounded $400 to $1,800 and $1,100). Bob Vila's figures are labelled as Angi/HomeAdvisor data from 2023. The leak answer now credits Fixr's $200 to $600 flashing price correctly; the minimum call-out fee and the insurance exclusion are now sourced. Added an answer on signs of needed repairs.
- Roof Replacement Cost
Typical range re-based on Fixr's published $7,500 to $14,000 (average $10,000); the previous $6,500 to $16,500 and $10,500 average were not published by any source. Size table replaced with HomeGuide's published asphalt prices by house size, which also fixes the $32,000 row that sat above the full range. Labor, permit and disposal lines now use published figures; added answers on replacement signs, timing, insurance, permits and the best season.
- Roof Replacement Cost per Square Foot in 2026 (and per Roofing Square)
Typical range re-based on Fixr's published $3.75 to $11 per sq ft with its $4.75 average; the previous $3.50 low bound and $5 average were not a published range. Size table now Fixr's published prices by roof size. Materials and labor per sq ft now HomeGuide's published shingle prices instead of a modeled split.
- Roof Tear-Off Cost
The average is now labelled as Fixr's $50 per square times 20 squares, and the full range ($600 to $5,250) matches the size table. HomeGuide's and HomeAdvisor's higher removal prices added for comparison; HomeAdvisor no longer credited with Angi's $1,000 to $5,000 total. Overlay answer re-sourced; confidence set to low because one publisher supports the range.
- Septic Tank Pumping Cost
Removed a $1,700 clog-removal price that is not in the cited Angi data and replaced it with Fixr's backup and clogged-line prices; the overflow cleanup price is now credited to This Old House, which publishes it. One inspection line names both Fixr pages ($100 to $300 and $100 to $900); the riser line now shows Fixr and This Old House. Job time is now This Old House's published 2 to 3 hours. Added timing and warning-sign answers.
- Sewer Line Repair Cost
Corrected "only Angi publishes a repair range": HomeGuide and Fixr publish wider repair figures, and confidence stays low because their scopes differ. Materials are no longer shown as a $21 to $32 part of the repair price (retail pipe prices moved to additional costs). Removed an unsourced $150 to $200 per foot under-slab figure, added This Old House's camera, root removal and restoration prices for comparison, and added repair time, insurance and warning-sign answers from This Old House and Fixr. The regional note now says no ZIP adjustment is applied.
- Sewer Line Replacement Cost
Full range corrected to Fixr's $1,000 to $20,000 for a sewer line replacement; the earlier $10,000 top was Angi's extreme and contradicted this page's own length table, calculator and answers. This Old House is now described as republishing Angi's figures rather than as a second source, and Bob Vila's 2023 figures as HomeAdvisor data. Labor rate now This Old House's published $150 to $500 per hour. The homeowner-responsibility answer no longer states a rule the sources do not publish; added signs, insurance and timing answers.
- Standing Seam Metal Roof Cost
Removed the "$60,400 or more" high end: HomeAdvisor's page says costs can reach $16,400 or more. The full range is now HomeAdvisor's own prices for 500 to 3,000 sq ft roofs, and the size table uses those published rows. Removed a flashing price and an installation time that no source supports; added HomeGuide (2023) as a second publisher and answers on installation time and lifespan. The calculator answer now describes how the calculator works.
- Sump Pump Installation & Replacement Cost
Full range now starts at This Old House's $350 replacement price instead of $800. Equipment line now uses This Old House's published pump prices ($80 to $1,000) instead of an assumed $600 top. Battery backup marked optional and shown with This Old House's backup-only prices; added lifespan, replacement signs and insurance answers. Removed an unsourced "standard for finished basements" label and an unverified minimum service fee.
- Tankless Water Heater Installation & Replacement Cost
Full range now spans Fixr's $600 to $6,000 for replacing a tankless unit, so the replacement row no longer falls outside it. The conversion answer no longer adds venting, gas line and electrical work on top of This Old House's installed price, which already lists them as parts of the job. The "worth it" answer now shows that electric tankless costs more to run than an electric tank (Fixr) and that output is limited by flow rate. Permit figure now This Old House's $50 to $200; Bob Vila figures dated 2023.
- Toilet Installation Cost
Headline changed from Angi's $224 to $533, whose scope (toilet included or installation only) Angi does not state, to Fixr's $250 to $800, which Fixr says includes materials and labor; Angi is now a comparison. The fixture and labor lines no longer exceed the installed headline. Removed an unsourced per-foot piping price and three fixture averages we could not verify; added Fixr's prices by toilet type, installation time and replacement signs.
- Water Heater Installation Labor Cost
Job duration and hourly rate now use published figures (This Old House: 1 to 3 hours and $40 to $200 per hour for a tank; Fixr: 2 to 3 hours for a gas tank) instead of modeled ones. Size-table averages labeled as calculated midpoints; the first-time installation line no longer implies Fixr prices a relocation; an unsourced remark about flat-rate quotes was replaced.
- Water Heater Replacement Cost
Headline changed from our $900 to $2,000 planning range to Angi's published $882 to $1,826 (average $1,348), with Fixr, This Old House and Bob Vila shown for comparison. Added a water heater repair section, signs of failure, job duration, insurance, permit and timing answers from Fixr and This Old House, and the 2029 federal efficiency rule as published by DOE. Corrected the DOE "condensing" wording, the first-time installation line and the size-table averages (calculated midpoints).