RoofingFull System Replacement
Roof Replacement Cost in 2026: How Much a New Roof Costs
Roof replacement typically costs $7,500 to $14,000, with a U.S. national average of $10,000.
Cost snapshot
U.S. national figures ·
- Typical range
- $7,500 – $14,000
- National average
- $10,000
- Full range
- $2,700 – $26,800
Where the typical range comes from: Fixr's published range for most roof replacements (page updated February 4, 2026); the full range is HomeGuide's minimum and maximum for an asphalt roof.
Roof replacement costs $7,500 to $14,000 for most homes, about $10,000 on average, according to Fixr (February 2026). Other publishers are close: HomeAdvisor reports $5,903 to $13,380 (average $9,611), HomeGuide $5,700 to $16,000 for an asphalt roof (average $10,800) and This Old House $10,319 for a 2,000 sq ft asphalt roof. Asphalt shingles are the most common roof; for about 2,000 sq ft of roofing, Fixr lists metal at $14,000 to $38,000, clay tile at $14,000 to $28,000 and slate at $20,000 to $60,000. The full range shown, $2,700 to $26,800, is HomeGuide's reported minimum and maximum for an asphalt roof replacement.

Overview
Roof Replacement Cost: Overview
Roof replacement costs $7,500 to $14,000 for most homes, about $10,000 on average (Fixr). Compare prices by house size and material, labor, permits and timing.
These figures come from the published cost sources listed under Methodology & sources; figures we calculate are labeled. Setting a ZIP code or state adjusts only the labor share, using Bureau of Labor Statistics wage data.
| What it covers | Typical range | Basis |
|---|---|---|
| Installed project | $7,500 – $14,000National average: $10,000 | High confidence; cited: Fixr, HomeAdvisor, HomeGuide, This Old House |
| Equipment or materials | $3,500 – $8,000 | Cited: Fixr, HomeGuide |
| Labor | $4,000 – $6,000 | Cited: Fixr, HomeGuide, This Old House |
By size
Cost by Roof Size & Scope
Roofing costs scale with roof area (measured in squares of 100 sq ft), pitch, and how much of the roof the project covers.
| Size or scope | Typical home coverage | Installed cost | Average | Source |
|---|---|---|---|---|
| 1,000 sq ft house (about 1,120 sq ft of roof) | Asphalt shingles, single story, 6:12 pitch (HomeGuide); average = midpoint | $3,500 – $6,700 | $5,100 | HomeGuide |
| 1,500 sq ft house (about 1,675 sq ft of roof) | Asphalt shingles, single story, 6:12 pitch (HomeGuide); average = midpoint | $5,000 – $10,100 | $7,550 | HomeGuide |
| 2,000 sq ft house (about 2,235 sq ft of roof) | Asphalt shingles, single story, 6:12 pitch (HomeGuide); average = midpoint | $6,700 – $13,400 | $10,050 | HomeGuide |
| 2,500 sq ft house (about 2,795 sq ft of roof) | Asphalt shingles, single story, 6:12 pitch (HomeGuide); average = midpoint | $8,500 – $16,800 | $12,650 | HomeGuide |
| 3,000 sq ft house (about 3,355 sq ft of roof) | Asphalt shingles, single story, 6:12 pitch (HomeGuide); average = midpoint | $10,100 – $20,100 | $15,100 | HomeGuide |
| 3,500 sq ft house (about 3,915 sq ft of roof) | Asphalt shingles, single story, 6:12 pitch (HomeGuide); average = midpoint | $11,700 – $23,500 | $17,600 | HomeGuide |
By type
Cost by Material & Method
| Type | What it involves | Typical cost |
|---|---|---|
| Asphalt Shingles (3-tab and architectural)30–35 years (This Old House) | The most common U.S. roof and the basis of this guide's typical range. Fixr's figure is for about 2,000 sq ft of roofing and its asphalt average is $10,000; This Old House reports $10,319 for a 2,000 sq ft roof and HomeAdvisor $3 to $7 per sq ft. | $6,000 – $10,000 (Fixr)This Old House, HomeAdvisor |
| Architectural Shingles25–30 years (Fixr) | Thicker laminated shingles; Fixr's architectural total spans standard to premium product lines. For about 2,000 sq ft of roofing; per sq ft, Fixr lists $4 to $8 and HomeAdvisor $4 to $6. | $8,000 – $32,000 (Fixr)HomeAdvisor |
| Metal Roofing40–70 years (This Old House) | Steel, aluminum or copper panels and metal shingles; standing seam is the premium style. For about 2,000 sq ft of roofing; This Old House reports $38,593 for a 2,000 sq ft roof, and HomeAdvisor lists standing seam at $7 to $30 per sq ft. | $14,000 – $38,000 (Fixr)This Old House, HomeAdvisor |
| Wood or Cedar Shake30–50 years (This Old House) | Split or sawn wood shakes or shingles. For about 2,000 sq ft of roofing; This Old House reports $26,302 for a 2,000 sq ft roof. | $10,000 – $30,000 (Fixr)This Old House |
| Concrete Tile50+ years (This Old House) | Heavy tile; ask whether the framing needs to be checked before switching from shingles. For about 2,000 sq ft of roofing; HomeAdvisor lists $9 to $18 per sq ft installed. | $14,000 – $24,000 (Fixr)HomeAdvisor, This Old House |
| Clay Tile50–100 years (This Old House) | Heavy fired-clay tile common in warm climates. For about 2,000 sq ft of roofing; This Old House reports $44,423 for a 2,000 sq ft roof and HomeAdvisor $8 to $25 per sq ft. | $14,000 – $28,000 (Fixr)This Old House, HomeAdvisor |
| Slate75–150 years (This Old House) | Natural stone; the heaviest and most expensive common roofing material. For about 2,000 sq ft of roofing. | $20,000 – $60,000 (Fixr)This Old House |
Breakdown
Parts vs. Labor Breakdown
What the equipment or materials cost compared with the installer's labor, and what each figure is based on.
Roofers
- Labor range
- $4,000 – $6,000
- Planning estimate of on-site hours
- 53 – 80 hrs
- BLS median employee wage
- $26.65/hr
- Equipment or materials: $3,500 – $8,000
- Calculated remainder: the typical range minus Fixr's average labor of $4,000 to $6,000. It covers shingles or panels, underlayment, ice and water shield, starter course, hip and ridge caps, vents, drip edge and flashing, plus the permit and disposal where the quote includes them. For reference, HomeGuide lists asphalt shingle materials at $100 to $250 per roofing square ($80 to $130 for 3-tab), and Fixr lists ice and water shield at about $0.50 per sq ft where cold-climate codes require it.
- Labor: $4,000 – $6,000
- Fixr puts labor at 40% to 60% of a replacement, or $4,000 to $6,000 on average, covering removal of the old roof, underlayment and installation. Other published figures: HomeGuide lists shingle labor at $150 to $300 per roofing square on one table and $200 to $350 on another, and roofers at $30 to $100 per hour; This Old House puts labor at about 65% of the cost and about $75 per hour. The hours shown are calculated (Fixr's labor range divided by This Old House's $75 per hour). Benchmark: BLS reports a May 2025 national median wage of $26.65 per hour for roofers (10th to 90th percentile: $18.01 to $39.29). That is what an employee earns; a contractor's rate also covers insurance, equipment, overhead and margin.
BLS reports what employees earn, not what contractors bill; contractor rates also cover insurance, vehicles, overhead and profit. We use the BLS wage only to adjust the labor share for your location.
Extras
Additional Line Items Often Needed
| Item | Typical added cost | Needed? | Notes |
|---|---|---|---|
| Old Roof Tear-Off and Disposal | $50 – $150 per square (Fixr)HomeAdvisor | Recommended | Often included in the quote; confirm it is. Removing the old roof lets the roofer inspect the deck. See the roof tear-off guide. Fixr's average is $50 per square including dumping fees; $150 applies to heavy materials or extra layers. HomeAdvisor lists $1,500 to $4,500 for removal and disposal. |
| Roof Decking (Sheathing) Replacement | $2 – $8 per sq ft (Fixr)HomeGuide | As Needed | Only for rotted or damaged areas found after tear-off; ask for a per-sheet or per-sq-ft unit price in the contract. HomeGuide lists $2 to $5 per sq ft. |
| Fascia and Soffit Repairs | $500 – $2,500 (Fixr) | As Needed | Hidden damage from long-term leaks at the eaves. |
| Rafter or Framing Repairs | Up to $5,000 added (Fixr) | As Needed | Significant rafter damage; structural work may need a permit revision. |
| Ice and Water Shield Upgrade | About $0.50 per sq ft (Fixr) | Common | Often required along the eaves in cold climates. Roughly $50 per roofing square. |
| Steep-Roof Surcharge | $1,000 – $3,000 (This Old House)HomeAdvisor | As Needed | Steep pitches need extra safety equipment and slow the crew down. HomeAdvisor gives the same $1,000 to $3,000 for steep slopes. |
Calculator
Roof Replacement Cost Estimator
Choose the options closest to your project for a planning range. It is not a quote; compare it with written, itemized proposals.
1House size
2Roof pitch
A ZIP code scales the labor share of the estimate (about 40%) by the BLS wage ratio for the trade.
National planning estimate. Not a quote.
- House size: Not sure (typical roof)
- $7,500 – $14,000
- Roof pitch
- Walkable pitch
- Location
- National
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
The 'not sure' option is this guide's typical range from the cost snapshot.
House-size options use this page's size rows (HomeGuide's prices by house size, with the roof area it assumes).
The steep-roof option adds This Old House's $1,000 to $3,000 steep-roof surcharge.
Rotted decking found after tear-off is extra ($2 to $8 per sq ft, Fixr).
Location
Personalize This Estimate by ZIP or State
A ZIP code or state changes only the labor share of this guide's range (about 40%), using BLS wage data for the trade. Materials, equipment and permits stay at national figures. Results are estimates, not contractor quotes.
National figures: typical $7,500 – $14,000, average $10,000.
Leave empty for national figures.
$10,000
National average $10,000 · no location applied
- Typical range
- $7,500 – $14,000
- Full project range
- $2,700 – $26,800
- Labor index (BLS wage ratio)
- 1.00×
- Materials, equipment, permits
- National (not adjusted)
$4,000 – $6,000
National labor band. Hourly rate cited in this guide: $30–$100/hr (national).
$3,500 – $8,000
This guide's national allowance (see its sources); not adjusted by location.
Permits and inspections
This guide's permit allowance: $100 – $500. Fees and rules are set by each city or county; this is not a local fee lookup, so ask the contractor who pulls the permit and what it costs.
Typical range in all 50 states and DC
Modeled, not published by a source: the national typical range with the labor share (about 40%) scaled by each state's BLS Occupational Employment and Wage Statistics (May 2025) mean wage for roofers, divided by the national mean of $27.95/hr. Materials, equipment and permits stay national.
| State | BLS mean wage | Labor index | Typical range | Average | Action |
|---|---|---|---|---|---|
| Alabama | $23.01/hr | 0.82× | $6,975 – $13,000 | $9,300 | |
| Alaska | $32.91/hr | 1.18× | $8,025 – $15,000 | $10,700 | |
| Arizona | $24.33/hr | 0.87× | $7,100 – $13,275 | $9,475 | |
| Arkansas | $22.01/hr | 0.79× | $6,850 – $12,800 | $9,150 | |
| California | $32.41/hr | 1.16× | $7,975 – $14,900 | $10,650 | |
| Colorado | $27.01/hr | 0.97× | $7,400 – $13,800 | $9,875 | |
| Connecticut | $32.93/hr | 1.18× | $8,025 – $15,000 | $10,700 | |
| Delaware | $26.58/hr | 0.95× | $7,350 – $13,725 | $9,800 | |
| District of Columbia | $33.05/hr | 1.18× | $8,050 – $15,025 | $10,725 | |
| Florida | $23.49/hr | 0.84× | $7,025 – $13,100 | $9,350 | |
| Georgia | $23.29/hr | 0.83× | $7,000 – $13,075 | $9,325 | |
| Hawaii | $29.53/hr | 1.06× | $7,675 – $14,325 | $10,225 | |
| Idaho | $26.11/hr | 0.93× | $7,300 – $13,625 | $9,725 | |
| Illinois | $37.33/hr | 1.34× | $8,500 – $15,875 | $11,350 | |
| Indiana | $28.75/hr | 1.03× | $7,575 – $14,150 | $10,125 | |
| Iowa | $25.04/hr | 0.90× | $7,200 – $13,425 | $9,575 | |
| Kansas | $25.66/hr | 0.92× | $7,250 – $13,550 | $9,675 | |
| Kentucky | $24.37/hr | 0.87× | $7,125 – $13,275 | $9,500 | |
| Louisiana | $25.38/hr | 0.91× | $7,225 – $13,475 | $9,625 | |
| Maine | $25.82/hr | 0.92× | $7,275 – $13,575 | $9,700 | |
| Maryland | $29.63/hr | 1.06× | $7,675 – $14,325 | $10,250 | |
| Massachusetts | $35.09/hr | 1.25× | $8,275 – $15,425 | $11,025 | |
| Michigan | $29.54/hr | 1.06× | $7,675 – $14,325 | $10,225 | |
| Minnesota | $35.06/hr | 1.25× | $8,250 – $15,425 | $11,025 | |
| Mississippi | $21.77/hr | 0.78× | $6,825 – $12,750 | $9,125 | |
| Missouri | $27.08/hr | 0.97× | $7,400 – $13,825 | $9,875 | |
| Montana | $27.41/hr | 0.98× | $7,450 – $13,900 | $9,925 | |
| Nebraska | $23.04/hr | 0.82× | $6,975 – $13,025 | $9,300 | |
| Nevada | $27.62/hr | 0.99× | $7,475 – $13,925 | $9,950 | |
| New Hampshire | $30.69/hr | 1.10× | $7,800 – $14,550 | $10,400 | |
| New Jersey | $35.76/hr | 1.28× | $8,325 – $15,550 | $11,125 | |
| New Mexico | $23.07/hr | 0.82× | $6,975 – $13,025 | $9,300 | |
| New York | $33.34/hr | 1.19× | $8,075 – $15,075 | $10,775 | |
| North Carolina | $24.06/hr | 0.86× | $7,075 – $13,225 | $9,450 | |
| North Dakota | $29.11/hr | 1.04× | $7,625 – $14,225 | $10,175 | |
| Ohio | $26.76/hr | 0.96× | $7,375 – $13,750 | $9,825 | |
| Oklahoma | $23.61/hr | 0.84× | $7,025 – $13,125 | $9,375 | |
| Oregon | $29.57/hr | 1.06× | $7,675 – $14,325 | $10,225 | |
| Pennsylvania | $27.15/hr | 0.97× | $7,425 – $13,850 | $9,875 | |
| Rhode Island | $30.57/hr | 1.09× | $7,775 – $14,525 | $10,375 | |
| South Carolina | $24.13/hr | 0.86× | $7,100 – $13,225 | $9,450 | |
| South Dakota | $22.59/hr | 0.81× | $6,925 – $12,925 | $9,225 | |
| Tennessee | $22.47/hr | 0.80× | $6,900 – $12,900 | $9,225 | |
| Texas | $22.69/hr | 0.81× | $6,925 – $12,950 | $9,250 | |
| Utah | $24.80/hr | 0.89× | $7,150 – $13,375 | $9,550 | |
| Vermont | $27.08/hr | 0.97× | $7,400 – $13,825 | $9,875 | |
| Virginia | $24.77/hr | 0.89× | $7,150 – $13,350 | $9,550 | |
| Washington | $33.11/hr | 1.19× | $8,050 – $15,025 | $10,750 | |
| West Virginia | $24.56/hr | 0.88× | $7,125 – $13,325 | $9,525 | |
| Wisconsin | $27.91/hr | 1.00× | $7,500 – $14,000 | $10,000 | |
| Wyoming | $23.89/hr | 0.85× | $7,075 – $13,200 | $9,425 |
Regional figures use only U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics (May 2025) for the trade: the mean wage in the state, or in one of eight large cities for ZIP codes inside them, divided by the national mean. ZIP codes outside the 50 states and DC use national figures.
Anatomy
Asphalt Roof Assembly, Layer by Layer
Part 1: Roof decking (sheathing)
Plywood or OSB nailed to the rafters. Damaged sections are found during tear-off and replaced at a per-square-foot price.
$2 – $8 per sq ft (Fixr) · HomeGuide
Part 2: Ice and water shield
A self-adhering membrane along the eaves and valleys that keeps ice-dam and wind-driven water out.
About $0.50 per sq ft (Fixr)
Part 3: Synthetic underlayment
A water-resistant layer over the rest of the deck, under the shingles.
Part 4: Starter course and drip edge
The starter strip seals the first row of shingles at the eave; the metal drip edge steers water into the gutter.
Part 5: Architectural shingles and ridge vent
Laminated asphalt shingles form the finished surface; the ridge vent lets hot, moist attic air escape at the peak.
Code and safety: Most jurisdictions require a permit for a full re-roof, and many codes do not allow a new layer over two existing layers. Ask whether the quote includes the permit, tear-off and disposal.
Market
Input Price Changes: Last 12 Months
Contractor quotes move with the cost of materials, equipment, and labor. The chart shows how official U.S. Bureau of Labor Statistics (BLS) price and wage series changed between Aug 25 and Aug 26. These are national input indices, not the price of this project, and they are not a forecast.
| BLS series | Aug 25 | Aug 26 | 12-month change |
|---|---|---|---|
| Asphalt shingle and coating materials manufacturing (PPI) (opens in a new tab) | 360.462 | 377.534 | +4.7% |
| Plywood (PPI) (opens in a new tab) | 271.138 | 300.124 | +10.7% |
| Average hourly earnings, specialty trade contractors (production and nonsupervisory) (opens in a new tab) | 37.02 | 38.94 | +5.2% |
Source: U.S. Bureau of Labor Statistics, Producer Price Index and Current Employment Statistics, retrieved 2026-10-08. Recent months are preliminary and can be revised for up to four months. Price indices are not seasonally adjusted. Each line is the percentage change from Aug 25.
Quote check
Is Your Quote in the Typical Range?
Enter a written estimate to see where it falls against this guide's planning range for your labor market.
Within the typical range
Your quote: $10,000
$7,500 – $14,000
Average $10,000
Within the typical range. Quotes inside this range still differ with equipment, scope, access and warranty; compare itemized quotes line by line.
Getting comparable quotes
- Ask each contractor to price materials, labor, permits, disposal and optional work separately.
- Confirm the scope, equipment model, warranty, schedule and exclusions in writing.
- Compare like-for-like proposals from licensed, insured local contractors. Repair Cost Atlas does not match homeowners with contractors.
Direct answers
Frequently Asked Questions: Roof Replacement Cost
Short, plain answers to the questions homeowners ask before contacting a contractor.
Fixr reports $7,500 to $14,000 for most roof replacements, about $10,000 on average. The other publishers are close: HomeAdvisor reports $5,903 to $13,380 (average $9,611), HomeGuide $5,700 to $16,000 for an asphalt roof (average $10,800) and This Old House $10,319 for a 2,000 sq ft asphalt roof. The total moves with roof area, pitch, the number of old layers to remove and the material.
For an asphalt shingle roof on a single-story house with a 6:12 pitch, HomeGuide lists $5,000 to $10,100 for a 1,500 sq ft house (about 1,675 sq ft of roof), $6,700 to $13,400 for a 2,000 sq ft house (about 2,235 sq ft) and $10,100 to $20,100 for a 3,000 sq ft house (about 3,355 sq ft). Roof area is larger than floor area, and steeper or more complex roofs add more. Across all materials, Fixr lists $7,500 to $22,000 for a 2,000 sq ft roof and $11,250 to $33,000 for 3,000 sq ft.
For about 2,000 sq ft of roofing, Fixr lists asphalt shingles at $6,000 to $10,000, architectural shingles at $8,000 to $32,000, cedar shake at $10,000 to $30,000, metal at $14,000 to $38,000, concrete tile at $14,000 to $24,000, clay tile at $14,000 to $28,000 and slate at $20,000 to $60,000. This Old House reports averages of $10,319 for asphalt, $26,302 for wood shake, $38,593 for metal and $44,423 for clay tile on a 2,000 sq ft roof.
Multiply your roof area, not your floor area, by a per-sq-ft price. Fixr reports $3.75 to $11 per sq ft for roof replacement, $4.75 on average, so a 2,000 sq ft roof comes to about $9,500 at the average (calculated), close to Fixr's $10,000 average for a whole project. For asphalt shingles This Old House reports $5.16 per sq ft and HomeGuide $3 to $6. Our roof replacement cost per square foot guide compares every material.
A complete estimate normally covers tear-off and disposal, underlayment, flashing, drip edge, shingles or panels, ridge caps and vents, the permit, and cleanup. Fixr notes that most roofers include removal but some charge $50 to $150 per square separately. Items usually priced only if needed: rotted decking ($2 to $8 per sq ft, Fixr), fascia and soffit repairs ($500 to $2,500), rafter repairs (up to $5,000), and gutters or skylights. Fixr adds that estimates usually include both a manufacturer's warranty and a workmanship warranty, so ask for both in writing.
Be cautious when a quote is a single lump sum with no breakdown of materials, labor and tear-off; when it names no shingle brand or product line; when it gives no unit price for rotted decking (so the final bill can grow); when the permit is missing or the homeowner is asked to pull it; when there is no written workmanship warranty alongside the manufacturer's warranty; or when you are pressed to sign the same day after a storm. This Old House's contractor checklist includes a material and labor warranty, and many manufacturers require professional installation to honor their warranty.
This Old House recommends replacing a roof that is more than 15 years old with widespread damage and repairing one under 10 years old with localized issues, and suggests considering replacement when more than 30% of the roof is substantially damaged. Fixr's rule of thumb is to repair when the repair costs less than half of a replacement and the roof has more than half of its life left. Repairs average about $1,150 (Fixr), against about $10,000 for a replacement.
This Old House points to extensive surface damage, leaks, moisture or structural problems, and a roof older than 15 years; Fixr says replacement is better than repair for widespread wear, moss or missing shingles. Bob Vila (2024) adds water stains in the attic, sagging, cracked or buckled shingles and shingle granules in the gutters. Localized damage on a roof with 10 or more years of life left can often be repaired instead (Fixr).
Fixr says a replacement takes one to seven days depending on the material, size and complexity, and This Old House says one day to a week or longer; 46% of the homeowners it surveyed said three to seven days. HomeGuide lists 1 to 3 days for asphalt shingles, 1 to 5 for metal and 6 to 8 for wood shakes or slate, and notes that rain, snow, high wind or temperatures below 40°F delay the work.
Usually only for sudden damage. HomeGuide says most policies cover replacement after an accident or natural disaster but not normal wear and tear from age, and Fixr says insurance may pay part or all of the cost when storm, hail or wind damaged the roof. Bob Vila notes that the deductible still applies. Check your policy and document the damage before you sign a contract.
In most places, yes. Fixr says most cities require a permit for roof replacement and lists $100 to $500, the same range HomeGuide gives; HomeAdvisor lists $100 to $1,400 and Fixr's Florida page $400 to $1,000. Rules and fees vary by city and county, so confirm in writing that the contractor pulls the permit and books the inspections.
The sources agree that the off-season can be cheaper but disagree on the months. Fixr says demand drops in fall and winter, This Old House says spring and winter are often best, and HomeGuide puts the peak season at late spring to fall. HomeAdvisor says peak-season work can cost 15% to 30% more. Cold weather has limits: HomeGuide notes that temperatures below 40°F delay installation.
Labor is the largest share of the job (about 65% in This Old House's survey), and This Old House notes that areas with higher living costs or a shortage of skilled roofers have higher labor rates; Fixr says coastal and urban areas typically pay more than rural ones. Permits vary too: Fixr lists $100 to $500 nationally but $400 to $1,000 on its Florida page. The calculator on this page adjusts the labor share by ZIP code using BLS roofer wage data, which is a modeled estimate rather than a local quote.
Choose your roof area in squares (one square is 100 sq ft of roof surface), the roof shape and pitch, and your ZIP code. The calculator starts from Fixr's $7,500 to $14,000 range, scales it by roof size, adds a planning allowance for pitch and complexity, and adjusts the labor share for your area using BLS roofer wage data. The size and pitch adjustments are planning assumptions, so use the result to check written quotes, not to replace them.
Fixr says labor usually covers removing the old roof, laying new underlayment and flashing, and installing the new roof, and puts it at 40% to 60% of a replacement ($4,000 to $6,000 on average). HomeGuide lists shingle labor at $200 to $350 per roofing square and roofers at $30 to $100 per hour; This Old House puts labor at about 65% of project costs and about $75 per hour. See the asphalt shingle guide for labor per roofing square by shingle type.
Remodeling magazine's 2025 Cost vs. Value report lists a national average job cost of $31,871 for replacing an asphalt-shingle roof and $51,865 for a metal roof. That report prices its own defined project specification, so it is not directly comparable to the typical range on this page, which is Fixr's published range for most projects. This Old House's $29,909 average is also higher because it averages every roofing material on a 2,000 sq ft roof. Compare itemized written quotes for your own roof.
In the Census Bureau's 2023 American Housing Survey, households that did roofing work in the previous two years reported a median of $10,000 and a mean of $11,610 across about 8.3 million projects. The category includes every kind of roof job, so treat it as a reality check on typical spending rather than a price list.
Evidence
What supports these figures?
Each figure on this page and the published sources it is credited to. “Use with caution” marks figures we could not match to a published price. Wage, equipment and code references support only that narrower point, not an installed price.
| Estimate | Range or value | Published sources | Status |
|---|---|---|---|
| Fixr reports a $10,000 average for roof replacement, with most projects at $7,500 to $14,000; HomeAdvisor reports $5,903 to $13,380 (average $9,611) and HomeGuide $5,700 to $16,000 (average $10,800). | $7,500 – $14,000 | Fixr (opens in a new tab)Angi (HomeAdvisor) (opens in a new tab)HomeGuide (opens in a new tab) | Source reviewed |
| Published per-square-foot prices for asphalt shingles are $3 to $8 (Fixr and HomeAdvisor) and $5.16 on average (This Old House); Fixr reports $4.75 on average within $3.75 to $11 for roof replacement overall. | $3 – $11 per sq ft | Fixr (opens in a new tab)Angi (HomeAdvisor) (opens in a new tab)This Old House (opens in a new tab) | Source reviewed |
| Fixr reports tear-off and disposal at $50 per square on average including dumping fees, and up to $150 per square for heavier materials or multiple layers. | $50 – $150 per square | Fixr (opens in a new tab) | Source reviewed |
| For about 2,000 sq ft of roofing, Fixr lists metal at $14,000 to $38,000, clay tile at $14,000 to $28,000 and slate at $20,000 to $60,000. | $14,000 – $60,000 | Fixr (opens in a new tab) | Source reviewed |
| Fixr lists roof decking replacement at $2 to $8 per sq ft and fascia and soffit repairs at $500 to $2,500. | $2 – $8 per sq ft | Fixr (opens in a new tab) | Source reviewed |
Sources
Methodology & Data Sources
The typical range and average come from the cost publishers listed below; we compare what they publish and label figures we calculate ourselves. Bureau of Labor Statistics (BLS) wage data adjusts only the labor share when you set a ZIP code or state. Technical references support specifications, not prices.
Cost publishers · 6 independent (14 pages)
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
- 12.
- 13.
- 14.
Wage data and technical references
- 15.
- 16.
- 17.
What changed
- Typical range re-based on Fixr's published $7,500 to $14,000 (average $10,000); the previous $6,500 to $16,500 and $10,500 average were not published by any source. Size table replaced with HomeGuide's published asphalt prices by house size, which also fixes the $32,000 row that sat above the full range. Labor, permit and disposal lines now use published figures; added answers on replacement signs, timing, insurance, permits and the best season.
