Planning tools
Home Repair Cost Calculators
Estimate a roof, AC, water heater or any other project for your size and ZIP code, check a quote against the typical range, and see whether an efficient replacement pays back.
01 · Any project
Estimate a project by size and ZIP code
The same calculator each guide uses: its national range, adjusted for size, complexity and the local labor market.
National typical range $7,500 – $14,000 · Read the roof replacement cost guide
The most-used guide calculators, with the full guide around them: Roof Replacement Cost, Roof Repair Cost, Asphalt Shingle Roof Replacement Cost, AC Compressor Replacement Cost, Furnace Replacement Cost, Furnace Repair Cost, AC Unit Replacement Cost, Water Heater Replacement Cost, Sewer Line Repair Cost and Gas Line Installation Cost.
1House size
2Roof pitch
A ZIP code scales the labor share of the estimate (about 40%) by the BLS wage ratio for the trade.
National planning estimate. Not a quote.
- House size: Not sure (typical roof)
- $7,500 – $14,000
- Roof pitch
- Walkable pitch
- Location
- National
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
The 'not sure' option is this guide's typical range from the cost snapshot.
House-size options use this page's size rows (HomeGuide's prices by house size, with the roof area it assumes).
The steep-roof option adds This Old House's $1,000 to $3,000 steep-roof surcharge.
Rotted decking found after tear-off is extra ($2 to $8 per sq ft, Fixr).
02 · Roofing
Roof replacement calculator by area, pitch and material
Roof area from your footprint and pitch, priced with published installed costs per square foot, plus tear-off, permit and a ZIP labor adjustment.
Ground area under the roof. Roof surface: 2,200 sq ft (22.0 )
National labor baseline (1.00×).
3
4Roofing material
5
Many installed prices already include removal. Fixr prices tear-off billed separately at $50 to $150 per square; its high end covers heavy materials or more than one layer.
About $405 – $823 per roofing square, all in.
- Installed roofing (2,200 sq ft)$4 – $8 per sq ft, Fixr
- $8,800 – $17,600
- Re-roofing permitFixr (national)
- $100 – $500
The bar shows the roof replacement guide's national range across materials. Architectural shingles are priced at Fixr's $4 to $8 per sq ft, so the default can run above that range.
Not included: replacing rotted decking found after tear-off, $2 – $8 per sq ft installed (Fixr).
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
03 · Quotes
Check a contractor quote
Compare a written bid with the typical planning range. The result is a reference point, not a judgment about whether a quote is fair.
Within the typical range
Your quote: $12,000
$8,000 – $16,000
Average $12,000
Within the typical range. Quotes inside this range still differ with equipment, scope, access and warranty; compare itemized quotes line by line.
04 · Payback
Energy savings and payback
Compare repairing an older, less efficient system with replacing it, and see how long the energy savings take to cover the extra cost.
Modeling assumption: set it for your climate.
Enter both ratings in the same system (labels since 2023 show SEER2; an older label may show only SEER). The model divides cooling load by each rating.
Modeling assumption.
From the unit label (example value).
From the quote (example value).
Starts at the heat pump guide average.
Starts at the AC compressor guide average.
EIA 2025 U.S. residential average: 17.23¢ per kWh.
EIA 2025 U.S. residential price, about $1.48 per therm.
From your utility or tax filing.
About $57 a month.
- Payback on the extra cost
- 10 years
- 10-year net result
- −$6
- Replacement
- $8,350
- Net out of pocket
- $8,350
- Repair instead
- $1,550
- Extra cost to recover
- $6,800
- 10-year utility savings
- $6,794
- 10-year return on the extra cost
- +0%
- CO₂ avoided a year (approx.)
- 3,025 lb
Defaults you can change: electricity 17.23¢ per kWh (EIA, U.S. residential average for 2025) and natural gas about $1.48 per therm (EIA's 2025 residential $15.34 per thousand cubic feet at 1,037 Btu per cubic foot; our conversion).
Cooling kWh = tons × 12,000 Btu × cooling hours ÷ (rating × 1,000); heat pump heating uses the same formula with heating hours and HSPF2. Hours and ratings are modeling assumptions you can change.
CO₂ uses 0.767 lb per kWh (EPA eGRID, 2023 U.S. average) and 11.67 lb per therm (EIA). Savings are not guaranteed; your bills, rates and use decide the result.
05 · Compare
Compare two projects side by side
Put two guides on one scale: typical ranges, national averages, labor hours, permits and what each range covers. Common pairs: AC compressor replacement cost or a new AC unit, a tank or tankless water heater, roof repair or replacement.
Open the comparison