HVACComponent Replacement
AC Compressor Replacement Cost in 2026: Price by Size, Warranty & Repair vs Replace
AC compressor replacement typically costs $800 to $2,800. Average reported by both This Old House and Fixr: $1,550.
Cost snapshot
U.S. national figures ·
- Typical range
- $800 – $2,800
- Average reported by both This Old House and Fixr
- $1,550
- Full range
- $600 – $3,000
Where the typical range comes from: Fixr's published range for a compressor replacement with parts and labor (July 2026); the outer ends are the $600 to $3,000 on Fixr's AC repair page.
Replacing an AC compressor typically costs $800 to $2,800 for parts and installation, about $1,550 on average: Fixr publishes that range and average, This Old House reports the same $1,550 average, and Angi reports $800 to $2,300 ($1,200 average). Larger systems can pass $3,000 (Fixr). Under a manufacturer parts warranty you still pay about $600 to $1,200 for labor and refrigerant (Fixr). An existing R-410A system can still be repaired with R-410A. If the system is over 10 years old or the repair is more than $1,000, This Old House suggests pricing a whole new AC unit as well.

Overview
AC Compressor Replacement Cost: Overview
AC compressor replacement costs $800 to $2,800 installed, about $1,550 on average (Fixr, This Old House). See tonnage prices, warranty, signs and R-410A repair.
These figures come from the published cost sources listed under Methodology & sources; figures we calculate are labeled. Setting a ZIP code or state adjusts only the labor share, using Bureau of Labor Statistics wage data.
| What it covers | Typical range | Basis |
|---|---|---|
| Installed project | $800 – $2,800Average reported by both This Old House and Fixr: $1,550 | High confidence; cited: Fixr, This Old House, Angi |
| Equipment or materials | $400 – $1,800 | Cited: Fixr, This Old House |
| Labor | $600 – $1,200 | Cited: Fixr, This Old House |
By size
Cost by Capacity & Scope
HVAC costs scale with system capacity (tonnage or motor size), the size of the home being served, and the scope of the work.
| Size or scope | Typical home coverage | Installed cost | Average | Source |
|---|---|---|---|---|
| 1.5 to 2 Ton | Smaller home (This Old House low / average / high) | $700 – $1,400 | $1,050 | This Old House |
| 2.5 to 3 Ton | Mid-size home (This Old House low / average / high) | $900 – $2,100 | $1,500 | This Old House |
| 3.5 to 4 Ton | Larger home (This Old House low / average / high) | $1,100 – $2,100 | $1,600 | This Old House |
| 5 Ton | Large home (Angi compressor price by size; average shown is the midpoint) | $1,800 – $2,600 | $2,200 | Angi |
By type
Cost by Equipment Type & Efficiency
| Type | What it involves | Typical cost |
|---|---|---|
| Scroll CompressorMost common today | The standard design in modern residential air conditioners. | About $1,000 average (This Old House) |
| Reciprocating CompressorLegacy systems | Older piston design found in legacy equipment. | About $700 average (This Old House) |
| Two-Stage or Variable-Speed CompressorHigh efficiency | Found in higher-efficiency systems; parts are model-specific and usually cost more. | Not published separately; ask for the part number and priceThis Old House, Fixr |
| Compressor Repair (Not Replacement)Check first | Electrical faults such as a failed capacitor or contactor can stop the compressor without the compressor failing. | About $931 average repair (This Old House) |
| Whole Outdoor Unit (Condenser)Alternative | Replacing the entire outdoor unit instead of only the compressor. | $1,200 – $4,200, about $2,700 (This Old House) |
| Heat Pump CompressorHeat pump systems | Heat pumps use the same kind of compressor in the outdoor unit. | $800 – $2,500 (Fixr) |
Breakdown
Parts vs. Labor Breakdown
What the equipment or materials cost compared with the installer's labor, and what each figure is based on.
HVAC Mechanics and Installers
- Labor range
- $600 – $1,200
- Planning estimate of on-site hours
- 2 – 4 hrs
- BLS median employee wage
- $29.33/hr
- Equipment or materials: $400 – $1,800
- The compressor itself. Fixr lists the part alone at $400 to $1,800; This Old House puts the compressor unit alone at $950 or more, with type averages of $700 (reciprocating) to $1,000 (scroll). Covered at no charge while a manufacturer parts warranty is active.
- Labor: $600 – $1,200
- Labor and refrigerant: Fixr lists $600 to $1,200, which is what you pay when the part is under warranty. An EPA Section 608 certified technician recovers the refrigerant, brazes in the compressor, evacuates and recharges the system. This Old House cites $113 per hour or an average flat fee of $600 for labor, and 47% of its surveyed owners said the job took 2 to 4 hours; Fixr lists $60 to $150 per hour. Benchmark: BLS reports a May 2025 national median wage of $29.33 per hour for HVAC mechanics and installers.
BLS reports what employees earn, not what contractors bill; contractor rates also cover insurance, vehicles, overhead and profit. We use the BLS wage only to adjust the labor share for your location.
Extras
Additional Line Items Often Needed
| Item | Typical added cost | Needed? | Notes |
|---|---|---|---|
| Refrigerant (R-410A / R-454B) | $50 – $120 per lbFixr | Required | Fixr 2026 HVAC guide: R-410A $50 to $80 per lb, R-454B $60 to $100; Fixr's AC article: R-410A $65 to $120. R-22 can exceed $150 per lb. A compressor on an existing R-410A system is recharged with R-410A. |
| Capacitor | $100 – $400Fixr, This Old House | Common | Fixr and This Old House ($150 to $400). The part itself is often under $50, so a failed capacitor is worth ruling out before a compressor. |
| Contactor or Relay | $100 – $450This Old House, Fixr | Common | This Old House $100 to $450; Fixr $150 to $400. |
| Liquid Line Filter Drier | Not priced separatelyThis Old House | Required | Usually replaced whenever the refrigerant circuit is opened and normally part of the job price; none of our sources prices it separately. |
| Diagnostic Service Call Fee | $75 – $250Fixr, This Old House | Required | Fixr $75 to $250; This Old House $75 to $150. |
| Extended Labor Warranty | $200 – $400This Old House | Optional | This Old House. |
Calculator
Estimate Your AC Compressor Replacement Cost
Choose the options closest to your project for a planning range. It is not a quote; compare it with written, itemized proposals.
1System size
2Manufacturer warranty
A ZIP code scales the labor share of the estimate (about 35%) by the BLS wage ratio for the trade.
National planning estimate. Not a quote.
- System size: Not sure (typical replacement)
- $800 – $2,800
- Manufacturer warranty
- Out of warranty: you pay the part, labor and refrigerant
- Location
- National
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
The 'not sure' option is this guide's typical range from the cost snapshot.
Size options use the tonnage rows of this page (This Old House; the 5-ton row is Angi).
Under a parts warranty Fixr estimates you still pay about $600 to $1,200 for labor and refrigerant. With a size selected, the size row is scaled by the ratio of that midpoint to the typical midpoint, a calculation rather than a published price.
Assumes an EPA Section 608 certified technician and a standard R-410A or R-454B system. A new indoor coil or a whole outdoor unit is not included.
Location
Personalize This Estimate by ZIP or State
A ZIP code or state changes only the labor share of this guide's range (about 35%), using BLS wage data for the trade. Materials, equipment and permits stay at national figures. Results are estimates, not contractor quotes.
National figures: typical $800 – $2,800, average $1,550.
Leave empty for national figures.
$1,550
National average $1,550 · no location applied
- Typical range
- $800 – $2,800
- Full project range
- $600 – $3,000
- Labor index (BLS wage ratio)
- 1.00×
- Materials, equipment, permits
- National (not adjusted)
$600 – $1,200
National labor band. Hourly rate cited in this guide: $60–$150/hr (national).
$400 – $1,800
This guide's national allowance (see its sources); not adjusted by location.
Permits and inspections
This guide does not price a permit. Rules are set by each city or county; ask the contractor whether one is needed and who pulls it.
Typical range in all 50 states and DC
Modeled, not published by a source: the national typical range with the labor share (about 35%) scaled by each state's BLS Occupational Employment and Wage Statistics (May 2025) mean wage for heating, air conditioning, and refrigeration mechanics and installers, divided by the national mean of $31.14/hr. Materials, equipment and permits stay national.
| State | BLS mean wage | Labor index | Typical range | Average | Action |
|---|---|---|---|---|---|
| Alabama | $24.67/hr | 0.79× | $740 – $2,600 | $1,425 | |
| Alaska | $38.53/hr | 1.24× | $865 – $3,025 | $1,675 | |
| Arizona | $29.28/hr | 0.94× | $785 – $2,750 | $1,525 | |
| Arkansas | $24.59/hr | 0.79× | $740 – $2,600 | $1,425 | |
| California | $36.24/hr | 1.16× | $845 – $2,950 | $1,650 | |
| Colorado | $34.29/hr | 1.10× | $830 – $2,900 | $1,600 | |
| Connecticut | $35.38/hr | 1.14× | $840 – $2,925 | $1,625 | |
| Delaware | $31.80/hr | 1.02× | $805 – $2,825 | $1,550 | |
| District of Columbia | $40.83/hr | 1.31× | $885 – $3,100 | $1,725 | |
| Florida | $27.55/hr | 0.89× | $770 – $2,675 | $1,500 | |
| Georgia | $27.44/hr | 0.88× | $765 – $2,675 | $1,475 | |
| Hawaii | $32.24/hr | 1.03× | $810 – $2,825 | $1,575 | |
| Idaho | $28.85/hr | 0.93× | $780 – $2,725 | $1,500 | |
| Illinois | $37.29/hr | 1.20× | $855 – $3,000 | $1,650 | |
| Indiana | $31.30/hr | 1.00× | $800 – $2,800 | $1,550 | |
| Iowa | $30.35/hr | 0.97× | $795 – $2,775 | $1,525 | |
| Kansas | $29.55/hr | 0.95× | $785 – $2,750 | $1,525 | |
| Kentucky | $28.30/hr | 0.91× | $775 – $2,700 | $1,500 | |
| Louisiana | $27.35/hr | 0.88× | $765 – $2,675 | $1,475 | |
| Maine | $31.39/hr | 1.01× | $800 – $2,800 | $1,550 | |
| Maryland | $35.49/hr | 1.14× | $840 – $2,925 | $1,625 | |
| Massachusetts | $37.38/hr | 1.20× | $855 – $3,000 | $1,650 | |
| Michigan | $31.01/hr | 1.00× | $800 – $2,800 | $1,550 | |
| Minnesota | $35.57/hr | 1.14× | $840 – $2,950 | $1,625 | |
| Mississippi | $25.49/hr | 0.82× | $750 – $2,625 | $1,450 | |
| Missouri | $30.01/hr | 0.96× | $790 – $2,775 | $1,525 | |
| Montana | $29.94/hr | 0.96× | $790 – $2,750 | $1,525 | |
| Nebraska | $29.35/hr | 0.94× | $785 – $2,750 | $1,525 | |
| Nevada | $30.46/hr | 0.98× | $795 – $2,775 | $1,550 | |
| New Hampshire | $34.37/hr | 1.10× | $830 – $2,900 | $1,600 | |
| New Jersey | $37.30/hr | 1.20× | $855 – $3,000 | $1,650 | |
| New Mexico | $26.60/hr | 0.85× | $760 – $2,650 | $1,475 | |
| New York | $35.94/hr | 1.15× | $845 – $2,950 | $1,625 | |
| North Carolina | $27.60/hr | 0.89× | $770 – $2,700 | $1,500 | |
| North Dakota | $33.66/hr | 1.08× | $825 – $2,875 | $1,600 | |
| Ohio | $31.73/hr | 1.02× | $805 – $2,825 | $1,550 | |
| Oklahoma | $27.71/hr | 0.89× | $770 – $2,700 | $1,500 | |
| Oregon | $32.90/hr | 1.06× | $815 – $2,850 | $1,575 | |
| Pennsylvania | $31.19/hr | 1.00× | $800 – $2,800 | $1,550 | |
| Rhode Island | $33.55/hr | 1.08× | $820 – $2,875 | $1,600 | |
| South Carolina | $27.14/hr | 0.87× | $765 – $2,675 | $1,475 | |
| South Dakota | $29.37/hr | 0.94× | $785 – $2,750 | $1,525 | |
| Tennessee | $27.79/hr | 0.89× | $770 – $2,700 | $1,500 | |
| Texas | $28.43/hr | 0.91× | $775 – $2,725 | $1,500 | |
| Utah | $28.85/hr | 0.93× | $780 – $2,725 | $1,500 | |
| Vermont | $32.24/hr | 1.03× | $810 – $2,825 | $1,575 | |
| Virginia | $29.42/hr | 0.94× | $785 – $2,750 | $1,525 | |
| Washington | $37.91/hr | 1.22× | $860 – $3,025 | $1,675 | |
| West Virginia | $24.85/hr | 0.80× | $745 – $2,600 | $1,450 | |
| Wisconsin | $32.41/hr | 1.04× | $810 – $2,850 | $1,575 | |
| Wyoming | $26.81/hr | 0.86× | $760 – $2,675 | $1,475 |
Regional figures use only U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics (May 2025) for the trade: the mean wage in the state, or in one of eight large cities for ZIP codes inside them, divided by the national mean. ZIP codes outside the 50 states and DC use national figures.
Anatomy
Inside the Outdoor Unit: Where the Compressor Sits
Part 1: Scroll compressor
Pumps refrigerant vapor from the low-pressure suction line up to high pressure. It is a sealed (hermetic) unit, so a failed compressor is replaced whole, not rebuilt.
About $1,000 average (This Old House)
Part 2: Condenser coil and fan
The fan pulls outdoor air across the finned coil so the hot, compressed refrigerant can shed the heat it carried out of the house.
Part 3: Run capacitor (in the control box)
Gives the compressor and fan motors the boost they need to start and run. A failed capacitor can look like a dead compressor, so it is worth testing first.
$100 – $400 · Fixr, This Old House
Part 4: Contactor (in the control box)
The switch the thermostat signal closes to send power to the compressor and fan.
$100 – $450 · This Old House, Fixr
Part 5: Service valves and refrigerant
Let the technician isolate the unit, recover the refrigerant and recharge the system after the new compressor is brazed in. Refrigerant is usually billed by the pound.
$50 – $120 per lb · Fixr
Code and safety: Recovering, opening or recharging a refrigerant circuit must be done by an EPA Section 608 certified technician. Most jurisdictions require a mechanical permit to replace equipment; ask who pulls it and whether it is in the quote.
Market
Input Price Changes: Last 12 Months
Contractor quotes move with the cost of materials, equipment, and labor. The chart shows how official U.S. Bureau of Labor Statistics (BLS) price and wage series changed between Aug 25 and Aug 26. These are national input indices, not the price of this project, and they are not a forecast.
| BLS series | Aug 25 | Aug 26 | 12-month change |
|---|---|---|---|
| Air-conditioning, refrigeration, and forced air heating equipment manufacturing (PPI) (opens in a new tab) | 312.596 | 324.82 | +3.9% |
| Average hourly earnings, specialty trade contractors (production and nonsupervisory) (opens in a new tab) | 37.02 | 38.94 | +5.2% |
Source: U.S. Bureau of Labor Statistics, Producer Price Index and Current Employment Statistics, retrieved 2026-10-08. Recent months are preliminary and can be revised for up to four months. Price indices are not seasonally adjusted. Each line is the percentage change from Aug 25.
Decision
Repair the Compressor or Replace the Entire AC?
Because the compressor is the most expensive mechanical component in an air conditioner, deciding whether to repair or replace hinges on equipment age, refrigerant type, and remaining system health.
Replace Compressor Only
$800 – $2,800
Typical range from this guide
- Ideal system age
- Under 10 years old
- Efficiency gain
- Maintains current system SEER2
- Warranty
- Ask for the parts and labor warranty in writing
- Expected added life
- Limited by the age of the rest of the system
When this option makes sense
- The system is under 10 years old and the repair costs less than $1,000 (This Old House).
- The compressor is covered by an active manufacturer parts warranty (you still pay about $600 to $1,200 for labor and refrigerant, per Fixr).
- The rest of the system (indoor coil, blower, electrical parts) is in good condition.
- A new central AC ($4,800 to $9,500 in our AC unit guide) is not in the budget right now.
Best if under an active manufacturer 10-year parts warranty.
Replace Entire AC System
$5,500 – $10,000
Typical range from the AC unit replacement guide
- Ideal system age
- 10 to 15+ years old
- Efficiency gain
- Upgraded to current SEER2 minimums or higher
- Warranty
- New manufacturer parts warranty (terms vary by brand)
- Expected added life
- 15 to 20 years when maintained (This Old House)
When this option makes sense
- The unit is more than 10–12 years old and nearing expected mechanical lifespan.
- System uses phased-out R-22 refrigerant (prohibitively expensive to service).
- Compressor replacement quote exceeds 50% of the cost of a brand new matched system.
- Indoor coil is leaking or corroded, risking premature failure of the new compressor.
Rule of thumb: the "5,000 rule" (age in years × repair cost above $5,000 suggests replacing).
Variables
8 Factors That Affect AC Compressor Replacement Cost
Quotes in this guide run from about $600 to $3,000. These are the mechanical and regional drivers behind that spread.
- 01
System Tonnage
Larger cooling capacities (4-ton, 5-ton) require larger displacement pumps with heavier copper windings.
- 02
Warranty Status
Under an active manufacturer parts warranty the compressor itself is covered, but Fixr estimates you still pay about $600 to $1,200 for labor and refrigerant.
- 03
Refrigerant Type
Fixr lists R-410A at $50 to $80 per lb and R-454B at $60 to $100 per lb; phased-out R-22 can exceed $150 per lb, which often makes a repair on an R-22 system impractical.
- 04
Local Labor Rates
Fixr lists HVAC labor at $60 to $150 per hour; This Old House cites $113 per hour or a $600 average flat fee. Metro markets sit at the top of that range.
- 05
Motor Burnout Status
A burned-out motor contaminates the lines with acid and carbon, so the contractor must flush the system and fit a new filter drier, which adds time and parts to the quote.
- 06
Equipment Brand
OEM compressors from premium brands usually cost more than universal aftermarket equivalents; ask the contractor to name the exact model on the quote.
- 07
After-Hours Service
Fixr lists after-hours work at 50% to 100% above standard rates, or an added $100 to $300.
- 08
Permits
Some cities require a mechanical permit for compressor work; ask whether the quote includes it and who pulls it.
Checklist
How to Get and Compare Contractor Quotes
Collect at least 2 to 3 written, itemized bids from licensed HVAC professionals. Ask these 8 questions before signing an agreement.
- 1.Is the compressor covered under an active manufacturer parts warranty?
- 2.What caused the initial compressor to fail (e.g. low airflow, acid burnout, failed capacitor)?
- 3.Does your quote include a brand-new liquid line filter drier and electrical contactor?
- 4.How many pounds of new refrigerant are included in your written estimate?
- 5.Will you perform a deep evacuation down to under 500 microns with a digital micron gauge?
- 6.What specific labor warranty do you provide on your installation workmanship?
- 7.Are municipal mechanical permits and refrigerant recovery disposal fees included?
- 8.What happens if additional leaks or indoor coil contamination are discovered during charging?
Consumer tip: Never accept a lump-sum quote that bundles equipment, labor, and refrigerant without line-item pricing. If a technician claims your unit is "too old to touch" without taking electrical amp draw or resistance readings, get a second independent opinion.
Payback
Energy Savings & Replacement Payback
Compare the operating cost of an older, less efficient unit with a more efficient replacement, and how long the difference takes to pay back.
Modeling assumption: set it for your climate.
Enter both ratings in the same system (labels since 2023 show SEER2; an older label may show only SEER). The model divides cooling load by each rating.
Starts at the AC unit replacement guide average.
Starts at the AC compressor guide average.
EIA 2025 U.S. residential average: 17.23¢ per kWh.
EIA 2025 U.S. residential price, about $1.48 per therm.
From your utility or tax filing.
About $41 a month.
- Payback on the extra cost
- 12.5 years
- 10-year net result
- −$1,238
- Replacement
- $7,750
- Net out of pocket
- $7,750
- Repair instead
- $1,550
- Extra cost to recover
- $6,200
- 10-year utility savings
- $4,962
- 10-year return on the extra cost
- −20%
- CO₂ avoided a year (approx.)
- 2,210 lb
Defaults you can change: electricity 17.23¢ per kWh (EIA, U.S. residential average for 2025) and natural gas about $1.48 per therm (EIA's 2025 residential $15.34 per thousand cubic feet at 1,037 Btu per cubic foot; our conversion).
Cooling kWh = tons × 12,000 Btu × cooling hours ÷ (rating × 1,000); heat pump heating uses the same formula with heating hours and HSPF2. Hours and ratings are modeling assumptions you can change.
CO₂ uses 0.767 lb per kWh (EPA eGRID, 2023 U.S. average) and 11.67 lb per therm (EIA). Savings are not guaranteed; your bills, rates and use decide the result.
Quote check
Is Your Quote in the Typical Range?
Enter a written estimate to see where it falls against this guide's planning range for your labor market.
Within the typical range
Your quote: $1,550
$800 – $2,800
Average $1,550
Within the typical range. Quotes inside this range still differ with equipment, scope, access and warranty; compare itemized quotes line by line.
Getting comparable quotes
- Ask each contractor to price materials, labor, permits, disposal and optional work separately.
- Confirm the scope, equipment model, warranty, schedule and exclusions in writing.
- Compare like-for-like proposals from licensed, insured local contractors. Repair Cost Atlas does not match homeowners with contractors.
Direct answers
Frequently Asked Questions: AC Compressor Replacement Cost
Short, plain answers to the questions homeowners ask before contacting a contractor.
Most AC compressor replacements cost $800 to $2,800 including parts and labor, with a $1,550 average (Fixr). This Old House reports the same $1,550 average, Angi $800 to $2,300 with a $1,200 average, and Fixr notes that larger or more complex systems can exceed $3,000.
This Old House lists low, average and high prices of $700, $1,050 and $1,400 for 1.5 to 2 tons; $900, $1,500 and $2,100 for 2.5 to 3 tons; and $1,100, $1,600 and $2,100 for 3.5 to 4 tons. Angi lists $1,800 to $2,600 for a 5-ton compressor.
This Old House says a compressor replacement is worth it when the system is under 10 years old and the repair costs less than $1,000; past that, or past 12 to 15 years, a new AC is often the better long-term choice. Fixr and This Old House both cite the 50% rule (replace when the repair exceeds half the price of a new unit), and Fixr describes the $5,000 rule (repair cost times the unit's age). An R-22 system with a leak points to replacement. Compare with a whole outdoor unit ($1,200 to $4,200, This Old House) or a new central AC system (see our AC unit replacement guide).
If the compressor part is covered, Fixr estimates you still pay about $600 to $1,200 for labor and refrigerant; its 2026 HVAC repair guide lists $600 to $2,650 for warranty jobs. This Old House lists installation-only warranty work on a whole condenser at $300 to $1,200.
This Old House cites $113 per hour or an average flat fee of $600 for labor. Fixr lists $60 to $150 per hour, plus an after-hours surcharge of $50 to $200, and $600 to $1,200 for labor and refrigerant when the part is under warranty. The job needs an EPA Section 608 certified technician because the refrigerant must be recovered and recharged.
This Old House reports an average compressor repair of $931. Many "compressor" failures are electrical: Fixr lists a capacitor at $100 to $400 (part under $50) and a contactor at $150 to $400, so ask the technician to rule those out before quoting a new compressor.
This Old House lists warm air blowing from the vents, loud noises, hard starts, tripped circuit breakers and an outdoor unit that will not turn on. Several of these can also come from a failed capacitor ($100 to $400 installed per Fixr) or contactor, so ask the technician to test those first.
In This Old House's homeowner survey, most compressor jobs took 8 hours or less, and 47% of owners said the contractor took 2 to 4 hours. Waiting for the part, or for a matching refrigerant, can add days.
Yes. EPA's refrigerant transition rules apply to new systems: EPA says existing systems may be serviced and repaired throughout their useful life, including replacing components, and components used to repair existing systems are not restricted. A new compressor on an R-410A system is charged with R-410A. Expect refrigerant to cost more over time: ACHR News reports that AHRI expects refrigerant prices to rise as supply falls under the AIM Act. For R-22 systems, only recycled, reclaimed or previously produced R-22 can be used for service (EPA), it can exceed $150 per pound (Fixr), and This Old House lists R-22 among the reasons to replace the whole system.
If the system can wait, This Old House suggests scheduling replacement in the off-season, from late fall to early spring. In summer a failed compressor usually cannot wait, and Fixr notes after-hours calls add $50 to $200.
The compressor is the pump inside the outdoor unit; the condenser coil is the finned coil around it; the condenser is the whole outdoor unit. This Old House's condenser page lists material costs of $1,000 to $2,500 for a compressor, $850 to $2,700 for a condenser coil and $850 to $3,000 for a full condenser unit, and $1,200 to $4,200 for a whole condenser installed. Its compressor page puts the compressor unit alone at $950 or more and Fixr at $400 to $1,800, so part prices differ by page.
Fixr lists heat pump compressor replacement at $800 to $2,500, close to an AC compressor. A heat pump also has parts an AC lacks, such as the reversing valve ($350 to $700 per Fixr).
Sources publish lifespans for the whole air conditioner rather than the compressor: Fixr says most AC units are designed to last 10 to 15 years. A compressor that fails early is often a symptom of another problem, so ask what caused the failure.
Included: the compressor, recovering and recharging refrigerant, a new filter drier, brazing, evacuation and a start-up test. Often extra: the refrigerant itself by the pound ($50 to $120 per lb across Fixr's pages), a capacitor or contactor, the diagnostic fee ($75 to $250 per Fixr), any permit your city requires, and repairs to the indoor coil.
This Old House reports that prices can vary by as much as $800 for the same job in the same area. Labor rates, system size, refrigerant type and warranty status explain most of the gap; enter your ZIP code to adjust the labor share for your area.
Be cautious when the quote does not state the compressor model and tonnage, does not list how many pounds of refrigerant are included, skips checking the capacitor and contactor, ignores an active parts warranty, or recommends a new compressor on an old R-22 system without pricing a full replacement.
Evidence
What supports these figures?
Each figure on this page and the published sources it is credited to. “Use with caution” marks figures we could not match to a published price. Wage, equipment and code references support only that narrower point, not an installed price.
| Estimate | Range or value | Published sources | Status |
|---|---|---|---|
| Residential AC compressor replacement typically costs between $800 and $2,300 (Angi). | $800 – $2,300 | Angi (HomeAdvisor) (opens in a new tab) | Source reviewed |
| This Old House and Fixr both report a $1,550 average AC compressor replacement. | $1,550 | This Old House (opens in a new tab)Fixr (opens in a new tab) | Source reviewed |
| Compressor labor: $113 per hour or a $600 average flat fee (This Old House). | $600 labor | This Old House (opens in a new tab) | Source reviewed |
| Under a parts warranty, labor and refrigerant still cost about $600 to $1,200 (Fixr). | $600 – $1,200 | Fixr (opens in a new tab) | Source reviewed |
| This Old House: replacing the compressor is worth it if the system is under 10 years old and the repair is under $1,000. | < 10 years, < $1,000 | This Old House (opens in a new tab) | Source reviewed |
Sources
Methodology & Data Sources
The typical range and average come from the cost publishers listed below; we compare what they publish and label figures we calculate ourselves. Bureau of Labor Statistics (BLS) wage data adjusts only the labor share when you set a ZIP code or state. Technical references support specifications, not prices.
Cost publishers · 3 independent (8 pages)
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
Wage data and technical references
- 9.
- 10.
- 11.
- 12.
- 13.
- 14.
What changed
- Typical range now Fixr's published $800 to $2,800 with the $1,550 average reported by Fixr and This Old House. The compressor part now shows Fixr's full $400 to $1,800, labor uses Fixr's $600 to $1,200 labor-and-refrigerant figure, refrigerant is $50 to $120 per pound across Fixr's pages, and unpublished permit and disposal allowances were removed. Added answers on failure signs, job length, repairing R-410A and R-22 systems, and timing.
