Plumbing cost guide
Sewer Line Repair Cost in 2026: Cost per Foot, Methods & Extras
Sewer line repair typically costs $1,100 to $4,100 (about $2,600 on average). Compare cost per foot by method, camera inspection, and restoration extras.
Last reviewed: October 2026
Cost Snapshot
$1,100 – $4,100
A sewer line repair typically costs between $1,100 and $4,100, with a published average of about $2,600, according to Angi's 2026 data. Repairs are priced by method per linear foot: $50 to $250 to dig and replace, $60 to $250 for trenchless work, $80 to $250 for CIPP lining, and $60 to $200 for pipe bursting. A camera inspection adds $300 to $400 (Angi) or $100 to $800 (Fixr). This guide covers repair: a full line replacement is a different project (HomeAdvisor reports $3,319 on average) and has its own guide. Only Angi publishes a repair range, and the independent Fixr page is about clearing clogs, so confidence is lower than for other guides.
Typical planning range based on the published references reviewed for this guide. Use it to prepare questions and compare written, itemized contractor proposals. Actual costs vary with project scope, materials, access, permits, and local conditions.
Parts vs. Labor Breakdown
| Component | Typical range | What it covers |
|---|---|---|
| Materials / equipment | $21 – $32 | Retail material reference only, not additive to the repair price: a Home Depot 4 in. PVC repair coupling was $20.87 and a 4 in. x 10 ft PVC sewer and drain pipe was $31.53 (also listed at $3.15 per foot) on 2026-10-09. |
| Labor | $1,100 – $4,100 | Whole-repair price. Angi publishes the typical repair range without a split between labor, materials, and equipment, and gives no hourly rate or hours for a repair. The range is shown as the full repair price rather than an invented breakdown. Benchmark: BLS reports a May 2025 national median wage of $30.67 per hour for plumbers and pipefitters. |
Cost by Size & Scope
| Size / scope | Typical coverage | Estimated installed cost | Average |
|---|---|---|---|
| Typical sewer line repair | Angi range; method and length vary | $1,100 – $4,100 | $2,600 |
| Replace a broken or sagging section | Fixr range for replacing a section, labor included | $1,500 – $3,000 | $2,250 |
Cost by Equipment & Installation Method
| Type | Spec | Typical cost | Details |
|---|---|---|---|
| Dig and Replace | Method (Angi) | $50 – $250 per linear foot | Open-trench excavation and pipe replacement. |
| Trenchless Repair | Method (Angi) | $60 – $250 per linear foot | Repair without a continuous trench; may not suit every line. |
| CIPP Lining | Method (Angi; HomeAdvisor $90 to $250) | $80 – $250 per linear foot | A cured-in-place liner inside the existing pipe, from one access point. |
| Pipe Bursting | Method | $60 – $200 per linear foot | The old pipe is broken apart while a new one is pulled in. |
Additional Line Items Often Needed
| Item | Typical cost | Necessity | Notes |
|---|---|---|---|
| Camera Inspection | $100 – $800 | Common | Angi lists $300 to $400 and Fixr lists $100 to $800; the two publishers do not agree. |
| Damage Cleanup | $500 – $10,000 | As Needed | Angi's range for cleanup after damage; a very wide range. |
| Landscaping Restoration | $300 – $10,000 | As Needed | Angi's range for restoring the yard after excavation. |
| Root Removal | $100 – $800 | As Needed | Fixr's table range; its text says $100 to $600. Pipe repair is separate. |
| Excavation | $400 – $1,200 per 100 linear feet | As Needed | HomeAdvisor's price for excavation on replacement work. |
| Work Under a Slab | $300 – $350 per foot | As Needed | HomeAdvisor's additional price under a slab; it notes Angi lists a lower $150 to $200 per foot. |
| Sewer Trap Work | $1,500 – $3,000 | As Needed | HomeAdvisor's price for sewer trap work. |
Frequently Asked Questions
How much does it cost to repair a sewer line?
Angi reports a typical repair range of $1,100 to $4,100 and an average of about $2,600. Fixr lists $1,500 to $3,000 to replace a broken or sagging section. HomeAdvisor does not publish a repair average.
How much does sewer line repair cost per foot?
Angi lists $50 to $250 per linear foot to dig and replace, $60 to $250 for trenchless work, $80 to $250 for CIPP lining, and $60 to $200 for pipe bursting. Angi's text prints one of these as per square foot, but its table uses per foot.
How is repair different from replacement?
Repair fixes a damaged section; replacement renews the whole run. HomeAdvisor reports a $3,319 average and a $1,388 to $5,323 range for replacement. Our sewer line replacement guide covers that project, and the two should not be compared as the same job.
What does a camera inspection cost?
Angi lists $300 to $400 and Fixr lists $100 to $800. Neither is the same price, so ask whether an inspection is included before the repair is quoted.
What can make a repair cost more?
Cleanup after damage ($500 to $10,000), landscaping restoration ($300 to $10,000), root removal ($100 to $800), and work under a slab ($300 to $350 per foot per HomeAdvisor) are all priced separately from the repair itself.
Why is the confidence rating lower for this guide?
Only Angi publishes a repair range. HomeAdvisor's page is about replacement, and Fixr's page is about clearing clogs, so its repair lines are used only for the section and per-foot figures. The same $50 to $250 per foot even appears as a repair, a replacement, and a material price on Fixr.
Related Plumbing cost guides
- Garbage Disposal Replacement Cost in 2026: Unit Price, Labor & Add-Ons
- Gas Line Installation Cost in 2026: Cost per Foot, Materials & Permits
- Gas Water Heater Replacement Cost in 2026: Natural Gas & Propane Systems
How we estimate these planning ranges and the sources we review.