HVAC10 cost guides

HVAC Repair & Replacement Cost Guides

What air conditioner, furnace, heat pump and ductwork repairs and replacements cost, from published price data. A new central AC unit typically costs $5,500 to $10,000 installed.

Start here

AC Unit Replacement Cost

Typical range$5,500 – $10,000

Heating and cooling repairs are often quoted on the spot, with the system already down. These HVAC cost guides turn published price data from Angi / HomeAdvisor, Fixr, This Old House, HomeGuide, Bob Vila and Forbes Home into planning ranges you can hold a quote against, with Bureau of Labor Statistics wages used only for the ZIP code adjustment. Each guide names its sources and labels any figure that is our own calculation rather than a published one.

Start with the decision in front of you. If the air conditioner has stopped cooling, the first question is whether to repair one part or replace the system. The AC compressor replacement cost guide prices one of the most expensive single-part repairs, typically $800 to $2,800, and the AC unit replacement cost guide prices a new outdoor unit with a matched coil, $7,750 (midpoint of Fixr's range), with the published repair-or-replace rules of thumb. A leaking or frozen indoor coil has its own guide: evaporator coil replacement cost.

For heat, the furnace repair cost guide covers service calls, ignitors, flame sensors, water leaks and heat exchangers, with typical repairs at $150 to $600. When the furnace is old or the heat exchanger is cracked, the furnace replacement cost guide prices a new furnace installed, about $4,800 on average. Heat pumps do both jobs: the heat pump replacement and installation guide prices air-source systems by home size, and mini split installation cost prices ductless systems per zone for rooms or homes without ducts.

Moving the air is a separate set of jobs. Blower motor replacement cost compares PSC and ECM motors, air duct replacement cost prices new or repaired ductwork by length, and air duct cleaning cost covers cleaning per vent and by home size.

Every range is a national planning estimate, not a quote. Use the calculator in each guide to adjust for system size and ZIP code, then compare at least two itemized written proposals that list the equipment model and efficiency, labor, refrigerant, permits, and both the parts and labor warranties.

Cooling

Central air conditioning

Repair one part or replace the system: the compressor, a new outdoor unit with a matched coil, and the indoor evaporator coil.

HVAC

AC Compressor Replacement Cost in 2026

AC compressor replacement costs $800 to $2,800 installed, about $1,550 on average (Fixr, This Old House). See tonnage prices, warranty, signs and R-410A repair.

Typical$800 – $2,800

HVAC

AC Unit Replacement Cost in 2026

Replacing a central AC unit costs $5,500 to $10,000 on existing ducts (Fixr, 3 tons). Compare prices by tonnage and SEER2, outdoor-unit swaps and refrigerants.

Typical$5,500 – $10,000

HVAC

Evaporator Coil Replacement Cost in 2026

Evaporator coil replacement costs $600 to $2,000, about $1,350 on average (Angi). Compare AC coil prices by tonnage, labor, refrigerant and repair vs replace.

Typical$600 – $2,000

Heating

Furnaces

Repair estimates by symptom and part, and the installed price of a new furnace.

HVAC

Furnace Repair Cost in 2026

Furnace repair typically costs $150 to $600, about $350 to $400 on average (Fixr). See estimates by part, water leaks, heat exchangers and repair vs replace.

Typical$150 – $600

HVAC

Furnace Replacement Cost in 2026

A new furnace costs $2,800 to $7,500 installed, about $4,800 on average (Fixr). Compare gas, electric, oil and propane by home size, labor, permits and timing.

Typical$2,800 – $7,500

Heat pumps & ductless

Heat pumps and mini-splits

Systems that both heat and cool: ducted air-source heat pumps by home size, and ductless mini-splits priced per zone.

HVAC

Heat Pump Replacement & Installation Cost in 2026

Heat pump replacement costs $5,000 to $15,000 installed, about $8,350 on average (Fixr). Compare prices by home size, SEER2, refrigerant and repair vs replace.

Typical$5,000 – $15,000

HVAC

Mini Split Installation Cost in 2026

Mini split installation typically costs $2,000 to $5,000, about $3,000 on average (Angi). See ductless prices per zone and BTU, labor, wiring and refrigerants.

Typical$2,000 – $5,000

Air distribution

Blowers and ductwork

Moving the air through the house: blower motors, duct replacement and repair, and duct cleaning.

HVAC

HVAC Blower Motor Replacement Cost in 2026

An HVAC blower motor replacement costs $350 to $1,150 installed, about $560 on average (Angi). Compare PSC and ECM motors, horsepower, labor and failure signs.

Typical$350 – $1,150

HVAC

Air Duct Replacement Cost in 2026

Air duct replacement costs about $2,000 to $4,500 for a 2,000 sq ft home (Angi). See prices per foot, repair estimates, signs of failure and repair vs replace.

Typical$2,000 – $4,500

HVAC

Air Duct Cleaning Cost in 2026

Air duct cleaning typically costs $271 to $509 (about $390, Angi), up to $1,200 in large homes. See price per vent, prices by home size, add-ons and red flags.

Typical$271 – $509

Every range is a planning estimate drawn from the publishers each guide cites, not a quote. See how the ranges are built or compare a compressor repair with a new AC unit.

Calculator

AC unit replacement calculator

Adjust the national AC unit replacement range for your system and ZIP code. Every HVAC guide has its own calculator.

1System size

2Efficiency tier

A ZIP code scales the labor share of the estimate (about 32%) by the BLS wage ratio for the trade.

Estimated project rangePlanning estimate
Estimated range: $5,500 – $10,000.

National planning estimate. Not a quote.

System size: Not sure (typical system)
$5,500 – $10,000
Efficiency tier
Baseline efficiency
Location
National

A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.

The 'not sure' option is this guide's typical range from the cost snapshot.

Size options use Fixr's installed prices by tonnage from the size table on this page.

Efficiency options add the difference between Fixr's unit-only prices for a 3-ton outdoor unit at that tier and at 14 SEER ($1,725 to $3,600 at 14 SEER; $2,875 to $6,000 at 16; $4,100 to $7,800 at 18; $5,750 to $10,800 at 20 to 21). That is a calculation, not a published installed price. Fixr lists each tier in SEER with its SEER2 equivalent.

Assumes existing, working ductwork. New ductwork, a new line set and electrical work are not included.

Other categories

Other repair cost guides

8 guides

Roofing cost guides

Replacement, repair, shingles, metal, tear-off, decking

12 guides

Plumbing cost guides

Water heaters, sewer and water lines, gas lines, fixtures

Tools

Cost calculators

Every guide's calculator, a roof area estimator and a quote check.

Tools

Compare two projects

Ranges, labor and timelines side by side.