HVACComponent Replacement
HVAC Blower Motor Replacement Cost in 2026: Furnace & AC Blower Prices (PSC vs ECM)
HVAC blower motor replacement typically costs $350 to $1,150. Angi's published average: $560.
Cost snapshot
U.S. national figures ·
- Typical range
- $350 – $1,150
- Angi's published average
- $560
- Full range
- $300 – $2,000
Where the typical range comes from: Angi's installed prices for a PSC motor ($350 to $800) and an ECM motor ($600 to $1,150); the outer ends are Fixr's $300 to $2,000 for blower motor work.
Replacing an HVAC blower motor typically costs $350 to $1,150 installed: Angi lists $350 to $800 for a PSC motor and $600 to $1,150 for an ECM motor, with a $560 average. This Old House prices the motor alone at about $575 (PSC) or $875 (ECM), plus $150 to $250 for labor, and Fixr lists $562 to $1,045 for a furnace blower motor including the service call. The same indoor blower moves air for the furnace and the central AC, so "furnace blower motor" and "AC blower motor" prices describe the same job.

Overview
HVAC Blower Motor Replacement Cost: Overview
An HVAC blower motor replacement costs $350 to $1,150 installed, about $560 on average (Angi). Compare PSC and ECM motors, horsepower, labor and failure signs.
These figures come from the published cost sources listed under Methodology & sources; figures we calculate are labeled. Setting a ZIP code or state adjusts only the labor share, using Bureau of Labor Statistics wage data.
| What it covers | Typical range | Basis |
|---|---|---|
| Installed project | $350 – $1,150Angi's published average: $560 | Medium confidence; cited: Angi, Fixr, This Old House |
| Equipment or materials | $325 – $1,125 | Cited: This Old House |
| Labor | $150 – $250 | Cited: This Old House, Angi, Fixr |
By size
Cost by Capacity & Scope
HVAC costs scale with system capacity (tonnage or motor size), the size of the home being served, and the scope of the work.
| Size or scope | Typical home coverage | Installed cost | Average | Source |
|---|---|---|---|---|
| 1/3 HP Motor | Our calculation: This Old House's average 1/3 hp motor ($450) plus its $150 to $250 labor. These rows use motor averages, so they run above Angi's $560 overall average. | $600 – $700 | $650 | This Old House |
| 1/2 HP Motor | Our calculation: average 1/2 hp motor ($560) plus $150 to $250 labor | $710 – $810 | $760 | This Old House |
| 3/4 HP Motor | Our calculation: average 3/4 hp motor ($838) plus $150 to $250 labor | $988 – $1,088 | $1,038 | This Old House |
| 1 HP Motor | Our calculation: average 1 hp motor ($1,125) plus $150 to $250 labor | $1,275 – $1,375 | $1,325 | This Old House |
By type
Cost by Equipment Type & Efficiency
| Type | What it involves | Typical cost |
|---|---|---|
| PSC (Permanent Split Capacitor) MotorStandard efficiency | Single- or multi-speed motor found in standard furnaces and older air handlers. | $350 – $800 installed (Angi) · motor about $575 (TOH)This Old House |
| ECM (Electronically Commutated) MotorHigh efficiency | Variable-speed motor with built-in electronics, common in high-efficiency equipment. | $600 – $1,150 installed (Angi) · motor about $875 (TOH)This Old House |
| Motor by SpeedMotor only (TOH) | This Old House average motor prices by speed type. | Single $600 · multi $710 · variable $1,050This Old House |
| ECM Control Module OnlyPart only (TOH) | Replacing only the electronic module when the motor itself still works; This Old House also lists an ECM repair kit at about $45. | About $520This Old House |
| Furnace Blower Motor (Fixr)Installed (Fixr) | Fixr's furnace repair table, service call included. | $562 – $1,045Fixr |
Breakdown
Parts vs. Labor Breakdown
What the equipment or materials cost compared with the installer's labor, and what each figure is based on.
HVAC Mechanics and Installers
- Labor range
- $150 – $250
- Planning estimate of on-site hours
- 1 – 3 hrs
- BLS median employee wage
- $29.33/hr
- Equipment or materials: $325 – $1,125
- The motor: This Old House lists average prices from $325 (1/4 hp) to $1,125 (1 hp), within an overall $170 to $2,400; about $575 for a PSC and $875 for an ECM motor.
- Labor: $150 – $250
- Installation labor of $150 to $250, published by both This Old House and Angi. This Old House says the job usually takes one to three hours, and Fixr's 2026 HVAC repair guide lists technicians at $75 to $150 per hour. Benchmark: BLS reports a May 2025 national median wage of $29.33 per hour for HVAC mechanics and installers.
BLS reports what employees earn, not what contractors bill; contractor rates also cover insurance, vehicles, overhead and profit. We use the BLS wage only to adjust the labor share for your location.
Extras
Additional Line Items Often Needed
| Item | Typical added cost | Needed? | Notes |
|---|---|---|---|
| Blower Wheel | About $163 (part)This Old House | As Needed | This Old House average. Needed when the wheel is bent, unbalanced or rusted to the shaft. |
| Run Capacitor | About $30 (part)This Old House | Common | This Old House average. A failed capacitor can stop a PSC motor without the motor failing. |
| Bearings or Belt | $98 / $53 (parts)This Old House | As Needed | This Old House averages for older belt-drive blowers. |
| Diagnostic / Service Call | $75 – $200Fixr | Required | Fixr's 2026 HVAC repair guide; many contractors apply the fee to the repair if you go ahead with them. |
Calculator
HVAC Blower Motor Replacement Cost Estimator
Choose the options closest to your project for a planning range. It is not a quote; compare it with written, itemized proposals.
1Motor size
2Motor type
A ZIP code scales the labor share of the estimate (about 21%) by the BLS wage ratio for the trade.
National planning estimate. Not a quote.
- Motor size: Not sure (typical replacement)
- $350 – $1,150
- Motor type
- Not sure
- Location
- National
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
The 'not sure' option is this guide's typical range from the cost snapshot.
Size options use this page's horsepower rows: This Old House's average motor price plus $150 to $250 labor (calculated).
Motor-type options show Angi's installed range when the size is 'not sure'. With a horsepower selected, the row is scaled by the ratio of Angi's PSC or ECM midpoint to the typical midpoint, a calculation rather than a published price.
A diagnostic fee ($75 to $200, Fixr) may be billed separately.
Location
Personalize This Estimate by ZIP or State
A ZIP code or state changes only the labor share of this guide's range (about 21%), using BLS wage data for the trade. Materials, equipment and permits stay at national figures. Results are estimates, not contractor quotes.
National figures: typical $350 – $1,150, average $560.
Leave empty for national figures.
$560
National average $560 · no location applied
- Typical range
- $350 – $1,150
- Full project range
- $300 – $2,000
- Labor index (BLS wage ratio)
- 1.00×
- Materials, equipment, permits
- National (not adjusted)
$150 – $250
National labor band. Hourly rate cited in this guide: $75–$150/hr (national).
$325 – $1,125
This guide's national allowance (see its sources); not adjusted by location.
Permits and inspections
This guide does not price a permit. Rules are set by each city or county; ask the contractor whether one is needed and who pulls it.
Typical range in all 50 states and DC
Modeled, not published by a source: the national typical range with the labor share (about 21%) scaled by each state's BLS Occupational Employment and Wage Statistics (May 2025) mean wage for heating, air conditioning, and refrigeration mechanics and installers, divided by the national mean of $31.14/hr. Materials, equipment and permits stay national.
| State | BLS mean wage | Labor index | Typical range | Average | Action |
|---|---|---|---|---|---|
| Alabama | $24.67/hr | 0.79× | $335 – $1,100 | $535 | |
| Alaska | $38.53/hr | 1.24× | $365 – $1,200 | $590 | |
| Arizona | $29.28/hr | 0.94× | $345 – $1,125 | $555 | |
| Arkansas | $24.59/hr | 0.79× | $335 – $1,100 | $535 | |
| California | $36.24/hr | 1.16× | $360 – $1,200 | $580 | |
| Colorado | $34.29/hr | 1.10× | $355 – $1,175 | $570 | |
| Connecticut | $35.38/hr | 1.14× | $360 – $1,175 | $575 | |
| Delaware | $31.80/hr | 1.02× | $350 – $1,150 | $560 | |
| District of Columbia | $40.83/hr | 1.31× | $375 – $1,225 | $595 | |
| Florida | $27.55/hr | 0.89× | $340 – $1,125 | $545 | |
| Georgia | $27.44/hr | 0.88× | $340 – $1,125 | $545 | |
| Hawaii | $32.24/hr | 1.03× | $355 – $1,150 | $565 | |
| Idaho | $28.85/hr | 0.93× | $345 – $1,125 | $550 | |
| Illinois | $37.29/hr | 1.20× | $365 – $1,200 | $585 | |
| Indiana | $31.30/hr | 1.00× | $350 – $1,150 | $560 | |
| Iowa | $30.35/hr | 0.97× | $350 – $1,150 | $555 | |
| Kansas | $29.55/hr | 0.95× | $345 – $1,150 | $555 | |
| Kentucky | $28.30/hr | 0.91× | $345 – $1,125 | $550 | |
| Louisiana | $27.35/hr | 0.88× | $340 – $1,125 | $545 | |
| Maine | $31.39/hr | 1.01× | $350 – $1,150 | $560 | |
| Maryland | $35.49/hr | 1.14× | $360 – $1,175 | $575 | |
| Massachusetts | $37.38/hr | 1.20× | $365 – $1,200 | $585 | |
| Michigan | $31.01/hr | 1.00× | $350 – $1,150 | $560 | |
| Minnesota | $35.57/hr | 1.14× | $360 – $1,175 | $575 | |
| Mississippi | $25.49/hr | 0.82× | $335 – $1,100 | $540 | |
| Missouri | $30.01/hr | 0.96× | $345 – $1,150 | $555 | |
| Montana | $29.94/hr | 0.96× | $345 – $1,150 | $555 | |
| Nebraska | $29.35/hr | 0.94× | $345 – $1,125 | $555 | |
| Nevada | $30.46/hr | 0.98× | $350 – $1,150 | $555 | |
| New Hampshire | $34.37/hr | 1.10× | $360 – $1,175 | $570 | |
| New Jersey | $37.30/hr | 1.20× | $365 – $1,200 | $585 | |
| New Mexico | $26.60/hr | 0.85× | $340 – $1,125 | $545 | |
| New York | $35.94/hr | 1.15× | $360 – $1,175 | $580 | |
| North Carolina | $27.60/hr | 0.89× | $340 – $1,125 | $545 | |
| North Dakota | $33.66/hr | 1.08× | $355 – $1,175 | $570 | |
| Ohio | $31.73/hr | 1.02× | $350 – $1,150 | $560 | |
| Oklahoma | $27.71/hr | 0.89× | $340 – $1,125 | $545 | |
| Oregon | $32.90/hr | 1.06× | $355 – $1,175 | $565 | |
| Pennsylvania | $31.19/hr | 1.00× | $350 – $1,150 | $560 | |
| Rhode Island | $33.55/hr | 1.08× | $355 – $1,175 | $570 | |
| South Carolina | $27.14/hr | 0.87× | $340 – $1,125 | $545 | |
| South Dakota | $29.37/hr | 0.94× | $345 – $1,125 | $555 | |
| Tennessee | $27.79/hr | 0.89× | $340 – $1,125 | $545 | |
| Texas | $28.43/hr | 0.91× | $345 – $1,125 | $550 | |
| Utah | $28.85/hr | 0.93× | $345 – $1,125 | $550 | |
| Vermont | $32.24/hr | 1.03× | $355 – $1,150 | $565 | |
| Virginia | $29.42/hr | 0.94× | $345 – $1,125 | $555 | |
| Washington | $37.91/hr | 1.22× | $365 – $1,200 | $585 | |
| West Virginia | $24.85/hr | 0.80× | $335 – $1,100 | $535 | |
| Wisconsin | $32.41/hr | 1.04× | $355 – $1,150 | $565 | |
| Wyoming | $26.81/hr | 0.86× | $340 – $1,125 | $545 |
Regional figures use only U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics (May 2025) for the trade: the mean wage in the state, or in one of eight large cities for ZIP codes inside them, divided by the national mean. ZIP codes outside the 50 states and DC use national figures.
Anatomy
Blower Assembly: Motor, Squirrel-Cage Wheel and Wiring
Part 1: Blower motor
Drives the fan. PSC motors run at a few fixed speeds and use a run capacitor; ECM (variable-speed) motors cost more and adjust their speed to the demand.
Part 2: Squirrel-cage blower wheel
Pushes air through the cabinet and into the ducts. A dirty or unbalanced wheel is cleaned or replaced, sometimes along with the motor.
About $163 (part) · This Old House
Part 3: Mounting bracket and wiring harness
The bracket holds the motor in the blower housing; the harness connects it to the control board.
Part 4: Air filter
Keeps dust off the wheel and motor. A clogged filter makes the motor work harder.
Code and safety: Turn off power at the furnace switch or the breaker before opening the blower compartment. Motors and capacitors run on line voltage, and a capacitor can hold a charge after the power is off.
Market
Input Price Changes: Last 12 Months
Contractor quotes move with the cost of materials, equipment, and labor. The chart shows how official U.S. Bureau of Labor Statistics (BLS) price and wage series changed between Aug 25 and Aug 26. These are national input indices, not the price of this project, and they are not a forecast.
| BLS series | Aug 25 | Aug 26 | 12-month change |
|---|---|---|---|
| Air-conditioning, refrigeration, and forced air heating equipment manufacturing (PPI) (opens in a new tab) | 312.596 | 324.82 | +3.9% |
| Average hourly earnings, specialty trade contractors (production and nonsupervisory) (opens in a new tab) | 37.02 | 38.94 | +5.2% |
Source: U.S. Bureau of Labor Statistics, Producer Price Index and Current Employment Statistics, retrieved 2026-10-08. Recent months are preliminary and can be revised for up to four months. Price indices are not seasonally adjusted. Each line is the percentage change from Aug 25.
Quote check
Is Your Quote in the Typical Range?
Enter a written estimate to see where it falls against this guide's planning range for your labor market.
Within the typical range
Your quote: $560
$350 – $1,150
Average $560
Within the typical range. Quotes inside this range still differ with equipment, scope, access and warranty; compare itemized quotes line by line.
Getting comparable quotes
- Ask each contractor to price materials, labor, permits, disposal and optional work separately.
- Confirm the scope, equipment model, warranty, schedule and exclusions in writing.
- Compare like-for-like proposals from licensed, insured local contractors. Repair Cost Atlas does not match homeowners with contractors.
Direct answers
Frequently Asked Questions: HVAC Blower Motor Replacement Cost
Short, plain answers to the questions homeowners ask before contacting a contractor.
Most blower motor replacements cost $350 to $1,150 installed. Angi lists $350 to $800 for a PSC motor and $600 to $1,150 for an ECM motor, with a $560 average. Fixr, an independent publisher, lists $562 to $1,045 for a furnace blower motor including the service call, and $300 to $2,000 for blower motor work in general. Older figures run lower: Bob Vila's page (updated in 2022) repeats Angi and HomeAdvisor's earlier $250 to $900 ($515 average), and HomeGuide lists $500 to $2,300.
The furnace blower is the same motor that moves air for the AC, so the price is the same: Fixr lists $562 to $1,045 with the service call, and This Old House lists the motor alone at $170 to $2,400 plus $150 to $250 labor.
In a central AC with a furnace or air handler, the indoor blower motor costs the same as above. Fixr lists blower motor work on AC systems at $300 to $2,000 and its 2026 AC article $450 to $2,000 installed; the outdoor condenser fan motor is a different part ($200 to $700 per Fixr).
Angi lists $350 to $800 installed for a PSC motor and $600 to $1,150 for an ECM motor. This Old House puts the motor alone at about $575 (PSC) and $875 (ECM), and a variable-speed motor at about $1,050.
This Old House lists weak or no airflow from the vents; rattling, squealing or screeching noises; a furnace that overheats or smells of burning; and a furnace that shuts down frequently. Fixr adds that a bad capacitor can make the motor hum without spinning, which is often mistaken for a failed motor, so ask the technician to test the capacitor (about $30 for the part) before replacing the motor.
This Old House says the job usually takes one to three hours, including inspecting the system and diagnosing the problem. Getting the right replacement motor can add time if the technician has to order it.
Often only the part. This Old House says most warranties cover blower motor parts but not installation, so a motor under warranty can leave you paying mainly for labor ($150 to $250). It also warns that a do-it-yourself repair could void the warranty. Check the furnace or air handler warranty and its registration date before you approve the quote.
If the motor is still running, yes. This Old House says HVAC contractors often charge higher rates during the winter months and suggests testing the furnace before cold weather so repairs can be scheduled when demand is lower. Fixr's furnace repair guide also notes that some companies raise service fees in winter.
This Old House lists average motor prices of $325 (1/4 hp), $450 (1/3 hp), $560 (1/2 hp), $838 (3/4 hp) and $1,125 (1 hp), before $150 to $250 of labor. Adding that labor gives the size table on this page; because those are motor averages, the rows run above Angi's $560 overall average, which includes many smaller PSC motors.
A blower motor is usually worth replacing on a furnace with years of life left; Fixr suggests repairs make sense when a furnace has five or more years left, and furnaces typically last 15 to 20 years. On an old furnace, compare the motor quote with a new furnace ($2,800 to $7,500 per Fixr). Before replacing the motor, ask whether a capacitor (about $30) or the ECM module (about $520) is the actual failure.
Ask the technician first. This Old House notes that the furnace model determines which motor types it can support. A furnace or air handler built for a variable-speed ECM motor may not run correctly with a cheaper PSC motor, and the swap can change airflow and efficiency, so ask whether the equipment manufacturer allows it before choosing the cheaper motor.
Included: the motor, labor ($150 to $250 per Angi and This Old House), mounting hardware and a test run. Often billed separately: the diagnostic visit ($75 to $200 per Fixr), a new capacitor (about $30 for the part), a blower wheel (about $163) and cleaning the blower assembly. Ask whether the motor is PSC or ECM and what horsepower it is, because both change the price.
Be cautious when the quote does not state whether the motor is PSC or ECM and its horsepower, replaces the whole motor without testing the capacitor or ECM module, or prices an ECM motor well above the published $600 to $1,150 installed range.
Evidence
What supports these figures?
Each figure on this page and the published sources it is credited to. “Use with caution” marks figures we could not match to a published price. Wage, equipment and code references support only that narrower point, not an installed price.
| Estimate | Range or value | Published sources | Status |
|---|---|---|---|
| Angi: blower motor replacement averages $560; PSC $350 to $800, ECM $600 to $1,150 installed; labor $150 to $250. These two ranges form the typical range. | $560 average | Angi (HomeAdvisor) (opens in a new tab) | Source reviewed |
| This Old House: motor alone about $575 (PSC) and $875 (ECM); labor $150 to $250. | $575 / $875 motor | This Old House (opens in a new tab) | Source reviewed |
| Fixr: furnace blower motor $562 to $1,045 including the service call. | $562 – $1,045 | Fixr (opens in a new tab) | Source reviewed |
| Fixr: blower motor work on AC systems $300 to $2,000 (outer ends of the snapshot). | $300 – $2,000 | Fixr (opens in a new tab) | Source reviewed |
| This Old House: replacement usually takes one to three hours; most warranties cover the motor but not installation. | 1–3 hours | This Old House (opens in a new tab) | Source reviewed |
Sources
Methodology & Data Sources
The typical range and average come from the cost publishers listed below; we compare what they publish and label figures we calculate ourselves. Bureau of Labor Statistics (BLS) wage data adjusts only the labor share when you set a ZIP code or state. Technical references support specifications, not prices.
Cost publishers · 5 independent (9 pages)
- 1.
- 2.
- 3.
- 4.
- 5.Fixr: Furnace Repair Cost (opens in a new tab)Read Nov 9, 2026
- 6.
- 7.
- 8.Fixr: Furnace Replacement Cost 2026 (opens in a new tab)Read Nov 9, 2026
- 9.
Wage data and technical references
What changed
- Typical range corrected to Angi's published PSC and ECM installed prices ($350 to $1,150, $560 average); the earlier $450 to $1,200 band was not published by any source. Low and high ends now come from Fixr ($300 to $2,000). Size rows are labelled as our calculation. Added answers on failure signs, job length, warranty coverage and timing.
