HVACFull System Replacement
Air Duct Replacement Cost in 2026: Ductwork Replacement & Repair Estimates
Air duct replacement typically costs $2,000 to $4,500. Midpoint of This Old House's 200-foot price ($3,100 to $3,700): $3,400.
Cost snapshot
U.S. national figures ·
- Typical range
- $2,000 – $4,500
- Midpoint of This Old House's 200-foot price ($3,100 to $3,700)
- $3,400
- Full range
- $1,600 – $9,300
Where the typical range comes from: Angi's published range for a 2,000 sq ft home with about 250 linear feet of duct; the outer ends are This Old House's 100-foot ($1,600) and 500-foot ($9,300) prices.
Replacing the ductwork in a typical home costs about $2,000 to $4,500 (Angi, for a 2,000 sq ft home with about 250 feet of duct). This Old House prices an average 200-foot system at $3,100 to $3,700 ($16 to $19 per linear foot), and Fixr lists a full replacement at $3,000 to $6,000. Small systems of about 100 feet start near $1,600, and 500-foot systems reach $7,800 to $9,300 (This Old House). If only part of the system is damaged, a repair usually costs $200 to $1,000 (Fixr, $600 average).

Overview
Air Duct Replacement Cost: Overview
Air duct replacement costs about $2,000 to $4,500 for a 2,000 sq ft home (Angi). See prices per foot, repair estimates, signs of failure and repair vs replace.
These figures come from the published cost sources listed under Methodology & sources; figures we calculate are labeled. Setting a ZIP code or state adjusts only the labor share, using Bureau of Labor Statistics wage data.
| What it covers | Typical range | Basis |
|---|---|---|
| Installed project | $2,000 – $4,500Midpoint of This Old House's 200-foot price ($3,100 to $3,700): $3,400 | Medium confidence; cited: Angi, This Old House, Fixr |
| Equipment or materials | $650 – $1,850 | Cited: This Old House |
| Labor | $950 – $2,200 | Cited: Fixr, This Old House |
By size
Cost by Capacity & Scope
HVAC costs scale with system capacity (tonnage or motor size), the size of the home being served, and the scope of the work.
| Size or scope | Typical home coverage | Installed cost | Average | Source |
|---|---|---|---|---|
| About 100 linear feet | Small home or partial system (This Old House; the average column is the midpoint of each row) | $1,600 – $1,900 | $1,750 | This Old House |
| About 200 linear feet | Average system (This Old House; midpoint) | $3,100 – $3,700 | $3,400 | This Old House |
| About 300 linear feet | Larger home (This Old House; midpoint) | $4,700 – $5,600 | $5,150 | This Old House |
| About 400 linear feet | Large or two-story home (This Old House; midpoint) | $6,200 – $7,500 | $6,850 | This Old House |
| About 500 linear feet | Very large or complex system (This Old House; midpoint) | $7,800 – $9,300 | $8,550 | This Old House |
By type
Cost by Equipment Type & Efficiency
| Type | What it involves | Typical cost |
|---|---|---|
| Flexible Duct, Non-InsulatedMaterials only (TOH) | Wire-reinforced flexible duct; cheapest material. | $1 – $3 per linear ftThis Old House |
| Flexible Duct, InsulatedMaterials only (TOH) | The common choice for attic retrofits. | $2 – $4 per linear ftThis Old House |
| Fiberboard (Duct Board)Materials only (TOH) | Rigid fiberglass board formed into square ducts. | $4 – $7 per linear ftThis Old House |
| Sheet Metal (Galvanized or Aluminum)Materials only (TOH) | Rigid metal trunks and branches; most durable. | $7 – $15 per linear ftThis Old House |
| Installed Price per Linear FootInstalled | All-in replacement price including labor. | $16 – $19 (TOH) · $10 – $25 (Angi) · $25 – $55 full system (Fixr)This Old House |
| Duct Repair Instead of ReplacementRepair (Fixr) | Fixing a leak, a loose or collapsed section, or a damaged run. | $200 – $1,000 (about $600)Fixr |
Breakdown
Parts vs. Labor Breakdown
What the equipment or materials cost compared with the installer's labor, and what each figure is based on.
HVAC Mechanics and Installers
- Labor range
- $950 – $2,200
- Planning estimate of on-site hours
- 8 – 16 hrs
- BLS median employee wage
- $29.33/hr
- Equipment or materials: $650 – $1,850
- Planning allowance for ducts, fittings, boots and sealant on a 200-foot system; no source publishes this total. This Old House lists materials alone per linear foot: flexible non-insulated $1 to $3, flexible insulated $2 to $4, fiberboard $4 to $7 and sheet metal $7 to $15.
- Labor: $950 – $2,200
- Planning allowance for removing the old ducts, hanging and sealing new runs and checking airflow; no source publishes the labor share. Fixr lists duct technicians at $75 to $200 per hour, and This Old House says a basic system with a simple layout takes 1 to 2 days (shown as 8 to 16 hours) while a large, complex one can take four days or more. Benchmark: BLS reports a May 2025 national median wage of $29.33 per hour for HVAC mechanics and installers.
BLS reports what employees earn, not what contractors bill; contractor rates also cover insurance, vehicles, overhead and profit. We use the BLS wage only to adjust the labor share for your location.
Extras
Additional Line Items Often Needed
| Item | Typical added cost | Needed? | Notes |
|---|---|---|---|
| Duct Sealing | $1,000 – $3,000Fixr | Optional | Fixr, whole-system sealing. |
| Insulating Ductwork | $1,000 – $2,500Fixr | Optional | Fixr. |
| Asbestos or Mold Remediation | $2,000+This Old House, Fixr | As Needed | This Old House: can add upwards of $2,000 when found in old ducts. Fixr lists mold-related duct repairs at $2,000 to $6,000. |
| Duct Inspection | $75 – $175Fixr | Recommended | Fixr. Useful before deciding between repair and replacement. |
| Permit | Less than $100 to several hundredThis Old House | As Needed | This Old House: "Permit fees often range from less than $100 to several hundred dollars." |
Calculator
Air Duct Replacement Cost Estimator
Choose the options closest to your project for a planning range. It is not a quote; compare it with written, itemized proposals.
1Length of ductwork replaced
2Access and material
A ZIP code scales the labor share of the estimate (about 45%) by the BLS wage ratio for the trade.
National planning estimate. Not a quote.
- Length of ductwork replaced: Not sure (typical home)
- $2,000 – $4,500
- Access and material
- Attic with walkable clearance, flexible duct
- Location
- National
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
The 'not sure' option is this guide's typical range from the cost snapshot.
Length options use This Old House's replacement prices by duct length from the table on this page.
MODELED ASSUMPTION: the crawlspace (1.25x plus $450) and sheet metal (1.35x plus $800) options are our planning adjustments. This Old House says hard-to-reach ducts take longer and sheet metal costs $7 to $15 per foot in materials, but it publishes no multiplier.
Location
Personalize This Estimate by ZIP or State
A ZIP code or state changes only the labor share of this guide's range (about 45%), using BLS wage data for the trade. Materials, equipment and permits stay at national figures. Results are estimates, not contractor quotes.
National figures: typical $2,000 – $4,500, average $3,400.
Leave empty for national figures.
$3,400
National average $3,400 · no location applied
- Typical range
- $2,000 – $4,500
- Full project range
- $1,600 – $9,300
- Labor index (BLS wage ratio)
- 1.00×
- Materials, equipment, permits
- National (not adjusted)
$950 – $2,200
National labor band. Hourly rate cited in this guide: $75–$200/hr (national).
$650 – $1,850
This guide's national allowance (see its sources); not adjusted by location.
Permits and inspections
This guide's permit allowance: $50 – $300. Fees and rules are set by each city or county; this is not a local fee lookup, so ask the contractor who pulls the permit and what it costs.
Typical range in all 50 states and DC
Modeled, not published by a source: the national typical range with the labor share (about 45%) scaled by each state's BLS Occupational Employment and Wage Statistics (May 2025) mean wage for heating, air conditioning, and refrigeration mechanics and installers, divided by the national mean of $31.14/hr. Materials, equipment and permits stay national.
| State | BLS mean wage | Labor index | Typical range | Average | Action |
|---|---|---|---|---|---|
| Alabama | $24.67/hr | 0.79× | $1,825 – $4,075 | $3,075 | |
| Alaska | $38.53/hr | 1.24× | $2,225 – $4,975 | $3,775 | |
| Arizona | $29.28/hr | 0.94× | $1,950 – $4,375 | $3,300 | |
| Arkansas | $24.59/hr | 0.79× | $1,800 – $4,075 | $3,075 | |
| California | $36.24/hr | 1.16× | $2,150 – $4,825 | $3,650 | |
| Colorado | $34.29/hr | 1.10× | $2,100 – $4,700 | $3,550 | |
| Connecticut | $35.38/hr | 1.14× | $2,125 – $4,775 | $3,600 | |
| Delaware | $31.80/hr | 1.02× | $2,025 – $4,550 | $3,425 | |
| District of Columbia | $40.83/hr | 1.31× | $2,275 – $5,125 | $3,875 | |
| Florida | $27.55/hr | 0.89× | $1,900 – $4,275 | $3,225 | |
| Georgia | $27.44/hr | 0.88× | $1,900 – $4,250 | $3,225 | |
| Hawaii | $32.24/hr | 1.03× | $2,025 – $4,575 | $3,450 | |
| Idaho | $28.85/hr | 0.93× | $1,925 – $4,350 | $3,275 | |
| Illinois | $37.29/hr | 1.20× | $2,175 – $4,900 | $3,700 | |
| Indiana | $31.30/hr | 1.00× | $2,000 – $4,500 | $3,400 | |
| Iowa | $30.35/hr | 0.97× | $1,975 – $4,450 | $3,350 | |
| Kansas | $29.55/hr | 0.95× | $1,950 – $4,400 | $3,325 | |
| Kentucky | $28.30/hr | 0.91× | $1,925 – $4,325 | $3,250 | |
| Louisiana | $27.35/hr | 0.88× | $1,900 – $4,250 | $3,225 | |
| Maine | $31.39/hr | 1.01× | $2,000 – $4,525 | $3,400 | |
| Maryland | $35.49/hr | 1.14× | $2,125 – $4,775 | $3,625 | |
| Massachusetts | $37.38/hr | 1.20× | $2,175 – $4,900 | $3,700 | |
| Michigan | $31.01/hr | 1.00× | $2,000 – $4,500 | $3,400 | |
| Minnesota | $35.57/hr | 1.14× | $2,125 – $4,800 | $3,625 | |
| Mississippi | $25.49/hr | 0.82× | $1,825 – $4,125 | $3,125 | |
| Missouri | $30.01/hr | 0.96× | $1,975 – $4,425 | $3,350 | |
| Montana | $29.94/hr | 0.96× | $1,975 – $4,425 | $3,350 | |
| Nebraska | $29.35/hr | 0.94× | $1,950 – $4,375 | $3,325 | |
| Nevada | $30.46/hr | 0.98× | $1,975 – $4,450 | $3,375 | |
| New Hampshire | $34.37/hr | 1.10× | $2,100 – $4,700 | $3,550 | |
| New Jersey | $37.30/hr | 1.20× | $2,175 – $4,900 | $3,700 | |
| New Mexico | $26.60/hr | 0.85× | $1,875 – $4,200 | $3,175 | |
| New York | $35.94/hr | 1.15× | $2,150 – $4,800 | $3,625 | |
| North Carolina | $27.60/hr | 0.89× | $1,900 – $4,275 | $3,225 | |
| North Dakota | $33.66/hr | 1.08× | $2,075 – $4,675 | $3,525 | |
| Ohio | $31.73/hr | 1.02× | $2,025 – $4,550 | $3,425 | |
| Oklahoma | $27.71/hr | 0.89× | $1,900 – $4,275 | $3,225 | |
| Oregon | $32.90/hr | 1.06× | $2,050 – $4,625 | $3,475 | |
| Pennsylvania | $31.19/hr | 1.00× | $2,000 – $4,500 | $3,400 | |
| Rhode Island | $33.55/hr | 1.08× | $2,075 – $4,650 | $3,525 | |
| South Carolina | $27.14/hr | 0.87× | $1,875 – $4,250 | $3,200 | |
| South Dakota | $29.37/hr | 0.94× | $1,950 – $4,375 | $3,325 | |
| Tennessee | $27.79/hr | 0.89× | $1,900 – $4,275 | $3,225 | |
| Texas | $28.43/hr | 0.91× | $1,925 – $4,325 | $3,275 | |
| Utah | $28.85/hr | 0.93× | $1,925 – $4,350 | $3,275 | |
| Vermont | $32.24/hr | 1.03× | $2,025 – $4,575 | $3,450 | |
| Virginia | $29.42/hr | 0.94× | $1,950 – $4,400 | $3,325 | |
| Washington | $37.91/hr | 1.22× | $2,200 – $4,950 | $3,725 | |
| West Virginia | $24.85/hr | 0.80× | $1,825 – $4,100 | $3,100 | |
| Wisconsin | $32.41/hr | 1.04× | $2,025 – $4,575 | $3,475 | |
| Wyoming | $26.81/hr | 0.86× | $1,875 – $4,225 | $3,200 |
Regional figures use only U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics (May 2025) for the trade: the mean wage in the state, or in one of eight large cities for ZIP codes inside them, divided by the national mean. ZIP codes outside the 50 states and DC use national figures.
Anatomy
Attic Duct Layout: Supply Plenum, Trunk and Flexible Branch Runs
Part 1: Plenum and trunk duct
The main box and large duct that carry air from the furnace or air handler and split it into branches.
Part 2: Insulated flexible branch ducts
Run to each room’s register. They move air best when kept short, fully stretched and supported, without kinks or sags.
$2 – $4 per linear ft · This Old House
Part 3: Register boots
The fittings where each branch meets the ceiling grille; their joints need to be sealed like the rest of the system.
Part 4: Sealing and insulation
Ducts in an unconditioned attic need insulation, and every joint should be sealed with mastic or approved foil tape.
$1,000 – $3,000 · Fixr
Code and safety: Many jurisdictions require a mechanical permit for new ductwork. Ask whether the quote includes it and any duct leakage test your area requires.
Market
Input Price Changes: Last 12 Months
Contractor quotes move with the cost of materials, equipment, and labor. The chart shows how official U.S. Bureau of Labor Statistics (BLS) price and wage series changed between Aug 25 and Aug 26. These are national input indices, not the price of this project, and they are not a forecast.
| BLS series | Aug 25 | Aug 26 | 12-month change |
|---|---|---|---|
| Air-conditioning, refrigeration, and forced air heating equipment manufacturing (PPI) (opens in a new tab) | 312.596 | 324.82 | +3.9% |
| Average hourly earnings, specialty trade contractors (production and nonsupervisory) (opens in a new tab) | 37.02 | 38.94 | +5.2% |
Source: U.S. Bureau of Labor Statistics, Producer Price Index and Current Employment Statistics, retrieved 2026-10-08. Recent months are preliminary and can be revised for up to four months. Price indices are not seasonally adjusted. Each line is the percentage change from Aug 25.
Quote check
Is Your Quote in the Typical Range?
Enter a written estimate to see where it falls against this guide's planning range for your labor market.
Within the typical range
Your quote: $3,400
$2,000 – $4,500
Average $3,400
Within the typical range. Quotes inside this range still differ with equipment, scope, access and warranty; compare itemized quotes line by line.
Getting comparable quotes
- Ask each contractor to price materials, labor, permits, disposal and optional work separately.
- Confirm the scope, equipment model, warranty, schedule and exclusions in writing.
- Compare like-for-like proposals from licensed, insured local contractors. Repair Cost Atlas does not match homeowners with contractors.
Direct answers
Frequently Asked Questions: Air Duct Replacement Cost
Short, plain answers to the questions homeowners ask before contacting a contractor.
Most whole-home duct replacements cost about $2,000 to $4,500: that is Angi's range for a 2,000 sq ft home with about 250 feet of duct. This Old House prices replacement at $16 to $19 per linear foot ($3,100 to $3,700 for an average 200-foot system), and Fixr lists a full replacement at $3,000 to $6,000. Very large systems cost more: This Old House lists $7,800 to $9,300 for 500 feet.
Fixr reports a $600 average duct repair, with most between $200 and $1,000. By problem: a broken vent $100 to $250, a hole $150 to $350, a leak $350 to $650, loose ducts $100 to $500, a collapsed section $500 to $2,500 and rodent damage $450 to $2,000. Its 2026 HVAC guide lists ductwork repairs at $200 to $2,100 (about $660).
Measure or ask for the total length of supply and return runs, then use This Old House's installed price of $16 to $19 per linear foot: about $1,600 to $1,900 for 100 feet, $3,100 to $3,700 for 200 feet, $4,700 to $5,600 for 300 feet, $6,200 to $7,500 for 400 feet and $7,800 to $9,300 for 500 feet. Then add a permit (less than $100 to several hundred dollars) and any asbestos or mold work, which This Old House says can add $2,000 or more.
Angi reports about $2,000 to $4,500 for a 2,000 sq ft home with roughly 250 linear feet of duct. Angi's overall average of $1,250 ($452 to $2,181, 3,970 projects) is lower because it includes partial jobs.
This Old House says repair is usually practical for systems under 10 years old with minor damage, and replacement is often needed for extensive leaks, significant corrosion or poor airflow in several rooms. Fixr compares a typical repair ($200 to $1,000) with full replacement ($3,000 to $6,000) and notes ducts typically last 10 to 15 years.
This Old House lists extensive air leaks; significant corrosion, deterioration or physical damage; poor airflow or uneven temperatures in several rooms; ductwork that was badly designed or installed; insulation failures across large parts of the system; and aging ducts that need frequent repairs. It also cites a rule of thumb of replacement after 10 to 15 years. One damaged run is usually a repair ($200 to $1,000 per Fixr), not a replacement.
This Old House says replacing a basic duct system with a simple layout can take 1 to 2 days, while a large and complex system can take four days or more. Attic and crawl space access, asbestos or mold work and permit inspections can add time.
Usually not for wear. This Old House says homeowners insurance generally does not cover duct replacement caused by age or normal wear and tear; coverage may apply when ducts are damaged suddenly, for example by extreme weather or fire. Check your own policy and ask the insurer before work starts.
Often, yes: duct replacement is mechanical work, and many cities require a permit and inspection. This Old House puts permit fees at less than $100 to several hundred dollars. Rules vary by city, so ask the contractor whether they pull the permit and whether the fee is in the quote.
This Old House lists 10 to 20 years for flexible ducts, 10 to 15 for fiberboard and 20 or more for sheet metal; OnOtto lists 10 to 25 years for flexible and 30 to 50 or more for galvanized metal. Installation quality, sealing and insulation make a large difference.
Clean ducts that are sound but dirty: Angi lists cleaning at $271 to $509 and Fixr at $300 to $700. Replace ducts that are torn, crushed, disconnected, moldy or contaminated by pests, because cleaning will not fix them.
Included: removing old ducts, new trunk and branch runs, boots and connections, sealing, and an airflow check. Often extra: hauling away the old ducts, the permit (less than $100 to several hundred dollars per This Old House), asbestos or mold work ($2,000 or more), duct insulation ($1,000 to $2,500 per Fixr) and new registers. Ask whether a duct leakage test is included and what result it must meet under your local code.
Be cautious when the quote does not state the duct length, material and insulation level, skips a permit where your city requires one, quotes a full replacement without an inspection ($75 to $175 per Fixr) when only one run is damaged, or adds mold remediation without showing evidence.
Evidence
What supports these figures?
Each figure on this page and the published sources it is credited to. “Use with caution” marks figures we could not match to a published price. Wage, equipment and code references support only that narrower point, not an installed price.
| Estimate | Range or value | Published sources | Status |
|---|---|---|---|
| This Old House: duct replacement costs $16 to $19 per linear foot; a 200-foot system about $3,100 to $3,700. | $16 – $19/linear ft | This Old House (opens in a new tab) | Source reviewed |
| Angi prices ductwork replacement at $10 to $25 per linear foot. | $10 – $25/linear ft | Angi (HomeAdvisor) (opens in a new tab) | Source reviewed |
| Angi's average across 3,970 projects, including partial jobs, is $1,250 (typical $452 to $2,181); a 2,000 sq ft home with about 250 linear feet costs $2,000 to $4,500. | $452 – $4,500 by scope | Angi (HomeAdvisor) (opens in a new tab) | Source reviewed |
| Fixr: duct repair averages $600, with most between $200 and $1,000. | $200 – $1,000 | Fixr (opens in a new tab) | Source reviewed |
| This Old House: 500 feet of ductwork $7,800 to $9,300; basic system 1 to 2 days; permit fees less than $100 to several hundred dollars; insurance generally does not cover wear and tear. | $7,800 – $9,300 (500 ft) | This Old House (opens in a new tab) | Source reviewed |
Sources
Methodology & Data Sources
The typical range and average come from the cost publishers listed below; we compare what they publish and label figures we calculate ourselves. Bureau of Labor Statistics (BLS) wage data adjusts only the labor share when you set a ZIP code or state. Technical references support specifications, not prices.
Cost publishers · 4 independent (8 pages)
- 1.
- 2.
- 3.Fixr: Cost to Repair Ductwork (opens in a new tab)Read Nov 9, 2026
- 4.Fixr: Furnace Replacement Cost 2026 (opens in a new tab)Read Nov 9, 2026
- 5.
- 6.OnOtto: How Long Does Ductwork Last? (opens in a new tab)Read Oct 9, 2026
- 7.
- 8.
Wage data and technical references
What changed
- One price for the average home: typical range now Angi's published $2,000 to $4,500 for a 2,000 sq ft home, with an average of $3,400 labelled as the midpoint of This Old House's 200-foot price. The unpublished $1,800 and $1,200 figures were removed; the high end is This Old House's 500-foot price ($9,300), now shown as a row. Labor rate corrected to Fixr's $75 to $200 per hour. Added answers on signs, job length, insurance and permits.
