RoofingFull System Replacement
Metal Roof Cost in 2026: Installation Price per Square Foot, by Metal & Roof Size
A metal roof typically costs $14,400 to $38,400, with a U.S. national average of $26,500.
Cost snapshot
U.S. national figures ·
- Typical range
- $14,400 – $38,400
- National average
- $26,500
- Full range
- $7,200 – $57,600
Where the typical range comes from: Fixr's published range for a 2,400 sq ft steel roof, about a 2,000 sq ft house (page updated January 23, 2026); the full range is the same steel price on 1,200 to 3,600 sq ft roofs.
A metal roof costs $14,400 to $38,400 for a 2,400 sq ft steel roof, about $26,500 on average, according to Fixr (January 2026); that is Fixr's $6 to $16 per sq ft steel price on the roof of a typical 2,000 sq ft house. HomeGuide reports $7,500 to $40,000 (average $23,800) at $5 to $16 per sq ft. HomeAdvisor's lower $11,769 average ($6,043 to $18,345) is not tied to a roof size, and This Old House reports $38,593 for a 2,000 sq ft metal roof. By style, HomeAdvisor lists $3.50 to $15 per sq ft for corrugated, $7 to $22 for metal shingles and $7 to $30 for standing seam. The full range shown applies Fixr's steel price to 1,200 to 3,600 sq ft roofs.

Overview
Metal Roof Cost: Overview
A metal roof costs $14,400 to $38,400 for a 2,400 sq ft steel roof, about $26,500 on average (Fixr). Compare prices per sq ft for steel, aluminum and copper.
These figures come from the published cost sources listed under Methodology & sources; figures we calculate are labeled. Setting a ZIP code or state adjusts only the labor share, using Bureau of Labor Statistics wage data.
| What it covers | Typical range | Basis |
|---|---|---|
| Installed project | $14,400 – $38,400National average: $26,500 | Medium confidence; cited: Fixr, HomeGuide, HomeAdvisor, This Old House |
| Equipment or materials | $7,200 – $19,200 | Cited: Fixr |
| Labor | $7,200 – $19,200 | Cited: Fixr, HomeAdvisor, HomeGuide, This Old House |
By size
Cost by Roof Size & Scope
Roofing costs scale with roof area (measured in squares of 100 sq ft), pitch, and how much of the roof the project covers.
| Size or scope | Typical home coverage | Installed cost | Average | Source |
|---|---|---|---|---|
| 1,200 sq ft roof (12 squares, calculated) | About a 1,000 sq ft house (Fixr); steel at Fixr's $6 – $16 per sq ft, average at Fixr's $11 | $7,200 – $19,200 | $13,200 | Fixr |
| 1,800 sq ft roof (18 squares, calculated) | About a 1,500 sq ft house; steel at Fixr's $6 – $16 per sq ft, average at Fixr's $11 | $10,800 – $28,800 | $19,800 | Fixr |
| 2,000 sq ft roof (20 squares, calculated) | Comparison size used by This Old House; steel at Fixr's $6 – $16 per sq ft, average at Fixr's $11 | $12,000 – $32,000 | $22,000 | Fixr |
| 2,400 sq ft roof (24 squares, Fixr) | About a 2,000 sq ft house (Fixr); Fixr's published range and average for a steel roof | $14,400 – $38,400 | $26,500 | Fixr |
| 3,000 sq ft roof (30 squares, calculated) | Large home; steel at Fixr's $6 – $16 per sq ft, average at Fixr's $11 | $18,000 – $48,000 | $33,000 | Fixr |
| 3,600 sq ft roof (36 squares, calculated) | Very large home; steel at Fixr's $6 – $16 per sq ft, average at Fixr's $11 | $21,600 – $57,600 | $39,600 | Fixr |
By type
Cost by Material & Method
| Type | What it involves | Typical cost |
|---|---|---|
| Exposed-Fastener Corrugated SheetsInstalled per sq ft | Corrugated or ribbed panels fastened through the face. Fixr lists $3.50 to $26 and HomeGuide $5 to $12. | $3.50 – $15 (HomeAdvisor)Fixr, HomeGuide |
| Concealed-Fastener Standing SeamInstalled per sq ft | Raised seams hide the fasteners. HomeGuide lists $9 to $16 and This Old House $8 to $39. | $7 – $30 (HomeAdvisor, Fixr)HomeGuide, This Old House |
| Metal Shingles or TilesInstalled per sq ft | Stamped metal in a shingle or tile profile. Fixr lists $6 to $22. | $7 – $22 (HomeAdvisor)Fixr |
| Sheet MetalInstalled per sq ft (HomeAdvisor) | Plain metal sheets. | $4 – $6.50HomeAdvisor |
| Steel (Galvalume or galvanized)Installed per sq ft by metal | The most common residential metal. HomeGuide lists $5 to $13 for galvanized or Galvalume steel. | $6 – $16 (HomeAdvisor, Fixr)HomeGuide |
| AluminumInstalled per sq ft by metal | Lightweight and corrosion-resistant; listed below steel by both sources. Fixr lists $4 to $12. | $4 – $11 (HomeAdvisor)Fixr |
| TinInstalled per sq ft by metal | Older term for light-gauge metal roofing. HomeAdvisor lists $5 to $12 and HomeGuide $6 to $18. | $3 – $15 (Fixr)HomeAdvisor, HomeGuide |
| ZincInstalled per sq ft by metal | Premium metal that weathers to a patina. | $6 – $12 (HomeAdvisor, Fixr) |
| CopperInstalled per sq ft by metal | The most expensive common roofing metal. | $15 – $30 (HomeAdvisor, Fixr) |
Breakdown
Parts vs. Labor Breakdown
What the equipment or materials cost compared with the installer's labor, and what each figure is based on.
Roofers
- Labor range
- $7,200 – $19,200
- Planning estimate of on-site hours
- 96 – 256 hrs
- BLS median employee wage
- $26.65/hr
- Equipment or materials: $7,200 – $19,200
- Calculated remainder after a 50% labor share of Fixr's $14,400 to $38,400: panels, underlayment, trim, ridge caps, flashing and fasteners. No publisher prices the materials alone for a whole metal roof; Fixr lists underlayment at $0.05 to $0.50 per sq ft.
- Labor: $7,200 – $19,200
- Fixr puts labor at 50% to 80% of a metal roof ($3 to $12 per sq ft) and HomeAdvisor at about 60%; this row uses 50% of the typical range (calculated). HomeGuide lists metal labor at $4 to $8 per sq ft, $9,600 to $19,200 for 2,400 sq ft (calculated). Crew-hours are calculated (labor divided by This Old House's $75 per hour). Benchmark: BLS reports a May 2025 national median wage of $26.65 per hour for roofers, an employee wage rather than a contractor rate.
BLS reports what employees earn, not what contractors bill; contractor rates also cover insurance, vehicles, overhead and profit. We use the BLS wage only to adjust the labor share for your location.
Extras
Additional Line Items Often Needed
| Item | Typical added cost | Needed? | Notes |
|---|---|---|---|
| Existing Shingle Tear-Off & Haul Away | $50 – $150 per square (Fixr)HomeGuide | Recommended | Fixr says metal can go over existing shingles but it is usually best to tear the old roof off and start fresh; its metal guide lists $1,000 to $7,400 for removal, depending on size and weight. HomeGuide lists $1 to $3 per sq ft. |
| Roof Decking Repair | $2 – $8 per sq ft (Fixr)HomeGuide | As Needed | Rotted areas of the deck are replaced before the panels go on. HomeGuide lists $2 to $5 per sq ft. |
Calculator
Metal Roof Cost Estimator
Choose the options closest to your project for a planning range. It is not a quote; compare it with written, itemized proposals.
1Roof size
2Metal
A ZIP code scales the labor share of the estimate (about 36%) by the BLS wage ratio for the trade.
National planning estimate. Not a quote.
- Roof size: Not sure (typical roof)
- $14,400 – $38,400
- Metal
- Steel, Galvalume or galvanized
- Location
- National
A ZIP code or state changes only the labor share of the estimate, using the BLS Occupational Employment and Wage Statistics (May 2025) wage ratio for the trade. Materials, equipment and permits stay at national figures. Planning estimates, not contractor quotes.
The 'not sure' option is this guide's typical range from the cost snapshot.
Roof-size options multiply the roof area by the installed price per sq ft of the selected metal (HomeAdvisor and Fixr): steel $6 to $16, aluminum $4 to $11, copper $15 to $30. Steel results match the rows on this page.
With the size 'not sure', aluminum (0.68x) or copper (2.05x) scales the typical range by the ratio of its per-sq-ft midpoint to steel's, a calculation.
Tear-off ($50 to $150 per square, Fixr) and decking repair ($2 to $8 per sq ft, Fixr) are extra.
Location
Personalize This Estimate by ZIP or State
A ZIP code or state changes only the labor share of this guide's range (about 36%), using BLS wage data for the trade. Materials, equipment and permits stay at national figures. Results are estimates, not contractor quotes.
National figures: typical $14,400 – $38,400, average $26,500.
Leave empty for national figures.
$26,500
National average $26,500 · no location applied
- Typical range
- $14,400 – $38,400
- Full project range
- $7,200 – $57,600
- Labor index (BLS wage ratio)
- 1.00×
- Materials, equipment, permits
- National (not adjusted)
$7,200 – $19,200
National labor band. Hourly rate cited in this guide: $30–$100/hr (national).
$7,200 – $19,200
This guide's national allowance (see its sources); not adjusted by location.
Permits and inspections
This guide's permit allowance: $100 – $500. Fees and rules are set by each city or county; this is not a local fee lookup, so ask the contractor who pulls the permit and what it costs.
Typical range in all 50 states and DC
Modeled, not published by a source: the national typical range with the labor share (about 36%) scaled by each state's BLS Occupational Employment and Wage Statistics (May 2025) mean wage for roofers, divided by the national mean of $27.95/hr. Materials, equipment and permits stay national.
| State | BLS mean wage | Labor index | Typical range | Average | Action |
|---|---|---|---|---|---|
| Alabama | $23.01/hr | 0.82× | $13,475 – $35,950 | $24,800 | |
| Alaska | $32.91/hr | 1.18× | $15,325 – $40,850 | $28,200 | |
| Arizona | $24.33/hr | 0.87× | $13,725 – $36,600 | $25,250 | |
| Arkansas | $22.01/hr | 0.79× | $13,300 – $35,450 | $24,475 | |
| California | $32.41/hr | 1.16× | $15,225 – $40,600 | $28,025 | |
| Colorado | $27.01/hr | 0.97× | $14,225 – $37,925 | $26,175 | |
| Connecticut | $32.93/hr | 1.18× | $15,325 – $40,850 | $28,200 | |
| Delaware | $26.58/hr | 0.95× | $14,150 – $37,725 | $26,025 | |
| District of Columbia | $33.05/hr | 1.18× | $15,350 – $40,925 | $28,225 | |
| Florida | $23.49/hr | 0.84× | $13,575 – $36,200 | $24,975 | |
| Georgia | $23.29/hr | 0.83× | $13,525 – $36,100 | $24,900 | |
| Hawaii | $29.53/hr | 1.06× | $14,700 – $39,175 | $27,050 | |
| Idaho | $26.11/hr | 0.93× | $14,050 – $37,475 | $25,875 | |
| Illinois | $37.33/hr | 1.34× | $16,150 – $43,050 | $29,700 | |
| Indiana | $28.75/hr | 1.03× | $14,550 – $38,800 | $26,775 | |
| Iowa | $25.04/hr | 0.90× | $13,850 – $36,975 | $25,500 | |
| Kansas | $25.66/hr | 0.92× | $13,975 – $37,275 | $25,725 | |
| Kentucky | $24.37/hr | 0.87× | $13,725 – $36,625 | $25,275 | |
| Louisiana | $25.38/hr | 0.91× | $13,925 – $37,125 | $25,625 | |
| Maine | $25.82/hr | 0.92× | $14,000 – $37,350 | $25,775 | |
| Maryland | $29.63/hr | 1.06× | $14,700 – $39,225 | $27,075 | |
| Massachusetts | $35.09/hr | 1.25× | $15,725 – $41,925 | $28,925 | |
| Michigan | $29.54/hr | 1.06× | $14,700 – $39,175 | $27,050 | |
| Minnesota | $35.06/hr | 1.25× | $15,725 – $41,900 | $28,925 | |
| Mississippi | $21.77/hr | 0.78× | $13,250 – $35,350 | $24,400 | |
| Missouri | $27.08/hr | 0.97× | $14,250 – $37,975 | $26,200 | |
| Montana | $27.41/hr | 0.98× | $14,300 – $38,150 | $26,325 | |
| Nebraska | $23.04/hr | 0.82× | $13,475 – $35,975 | $24,825 | |
| Nevada | $27.62/hr | 0.99× | $14,350 – $38,225 | $26,375 | |
| New Hampshire | $30.69/hr | 1.10× | $14,900 – $39,750 | $27,425 | |
| New Jersey | $35.76/hr | 1.28× | $15,850 – $42,250 | $29,150 | |
| New Mexico | $23.07/hr | 0.82× | $13,500 – $35,975 | $24,825 | |
| New York | $33.34/hr | 1.19× | $15,400 – $41,075 | $28,350 | |
| North Carolina | $24.06/hr | 0.86× | $13,675 – $36,475 | $25,175 | |
| North Dakota | $29.11/hr | 1.04× | $14,625 – $38,975 | $26,900 | |
| Ohio | $26.76/hr | 0.96× | $14,175 – $37,800 | $26,100 | |
| Oklahoma | $23.61/hr | 0.84× | $13,600 – $36,250 | $25,025 | |
| Oregon | $29.57/hr | 1.06× | $14,700 – $39,200 | $27,050 | |
| Pennsylvania | $27.15/hr | 0.97× | $14,250 – $38,000 | $26,225 | |
| Rhode Island | $30.57/hr | 1.09× | $14,875 – $39,700 | $27,400 | |
| South Carolina | $24.13/hr | 0.86× | $13,700 – $36,500 | $25,200 | |
| South Dakota | $22.59/hr | 0.81× | $13,400 – $35,750 | $24,675 | |
| Tennessee | $22.47/hr | 0.80× | $13,375 – $35,700 | $24,625 | |
| Texas | $22.69/hr | 0.81× | $13,425 – $35,800 | $24,700 | |
| Utah | $24.80/hr | 0.89× | $13,825 – $36,825 | $25,425 | |
| Vermont | $27.08/hr | 0.97× | $14,250 – $37,975 | $26,200 | |
| Virginia | $24.77/hr | 0.89× | $13,800 – $36,825 | $25,425 | |
| Washington | $33.11/hr | 1.19× | $15,350 – $40,950 | $28,275 | |
| West Virginia | $24.56/hr | 0.88× | $13,775 – $36,725 | $25,350 | |
| Wisconsin | $27.91/hr | 1.00× | $14,400 – $38,375 | $26,500 | |
| Wyoming | $23.89/hr | 0.85× | $13,650 – $36,400 | $25,125 |
Regional figures use only U.S. Bureau of Labor Statistics Occupational Employment and Wage Statistics (May 2025) for the trade: the mean wage in the state, or in one of eight large cities for ZIP codes inside them, divided by the national mean. ZIP codes outside the 50 states and DC use national figures.
Anatomy
Metal Roof Assembly: Standing Seam Panels, Clips, Underlayment and Deck
Part 1: Standing seam panels
Long panels joined by raised seams, with the fasteners hidden. Exposed-fastener panels are screwed through the face instead.
Part 2: Concealed clips
Fastened to the deck and locked into the seams, they hold the panels down while letting them expand and contract.
Part 3: Underlayment
A synthetic underlayment, often a high-temperature type, goes between the deck and the metal.
Part 4: Roof deck
Solid sheathing under the panels. Damaged areas are replaced before the metal goes on.
$2 – $8 per sq ft (Fixr) · HomeGuide
Part 5: Ridge vent
Vents the attic at the peak, under the metal ridge cap.
Code and safety: A metal re-roof needs the same permit as any re-roof in most jurisdictions. Ask whether the old roof will be torn off or covered, which local code may limit.
Market
Input Price Changes: Last 12 Months
Contractor quotes move with the cost of materials, equipment, and labor. The chart shows how official U.S. Bureau of Labor Statistics (BLS) price and wage series changed between Aug 25 and Aug 26. These are national input indices, not the price of this project, and they are not a forecast.
| BLS series | Aug 25 | Aug 26 | 12-month change |
|---|---|---|---|
| Steel mill products (PPI) (opens in a new tab) | 308.772 | 381.162 | +23.4% |
| Sheet metal work manufacturing (PPI) (opens in a new tab) | 317.114 | 337.833 | +6.5% |
| Average hourly earnings, specialty trade contractors (production and nonsupervisory) (opens in a new tab) | 37.02 | 38.94 | +5.2% |
Source: U.S. Bureau of Labor Statistics, Producer Price Index and Current Employment Statistics, retrieved 2026-10-08. Recent months are preliminary and can be revised for up to four months. Price indices are not seasonally adjusted. Each line is the percentage change from Aug 25.
Quote check
Is Your Quote in the Typical Range?
Enter a written estimate to see where it falls against this guide's planning range for your labor market.
Within the typical range
Your quote: $26,500
$14,400 – $38,400
Average $26,500
Within the typical range. Quotes inside this range still differ with equipment, scope, access and warranty; compare itemized quotes line by line.
Getting comparable quotes
- Ask each contractor to price materials, labor, permits, disposal and optional work separately.
- Confirm the scope, equipment model, warranty, schedule and exclusions in writing.
- Compare like-for-like proposals from licensed, insured local contractors. Repair Cost Atlas does not match homeowners with contractors.
Direct answers
Frequently Asked Questions: Metal Roof Cost
Short, plain answers to the questions homeowners ask before contacting a contractor.
Fixr reports about $11 per sq ft on average within $3 to $30, including materials and installation, and HomeGuide $5 to $16. By style, HomeAdvisor lists $3.50 to $15 for corrugated, $4 to $6.50 for sheet metal, $7 to $22 for metal shingles and $7 to $30 for standing seam. By metal, HomeAdvisor and Fixr list steel at $6 to $16, zinc at $6 to $12 and copper at $15 to $30, with aluminum at $4 to $11 (HomeAdvisor) or $4 to $12 (Fixr). This Old House reports a $19.30 average for metal overall.
Fixr says a 1,000 sq ft home needs about 1,200 sq ft of roofing and a 2,000 sq ft home 2,400 to 2,500 sq ft; its $14,400 to $38,400 (average $26,500) is for a 2,400 sq ft steel roof. At Fixr's steel price of $6 to $16 per sq ft, a 1,200 sq ft roof is $7,200 to $19,200 and an 1,800 sq ft roof $10,800 to $28,800 (calculated). HomeGuide lists $7,500 to $24,000 for 1,500 sq ft and $10,000 to $32,000 for 2,000 sq ft of roof, and This Old House averages $28,950 for 1,500 and $38,600 for 2,000 sq ft.
Fixr says metal costs two to three times as much as asphalt shingles and lasts at least twice as long: about $11 per sq ft installed against $4. For about 2,000 sq ft of roofing, Fixr's roof replacement guide lists metal at $14,000 to $38,000 against $6,000 to $10,000 for asphalt shingles, and This Old House reports $38,593 for metal and $10,319 for asphalt. This Old House gives 40 to 70 years for metal versus 30 to 35 for asphalt.
They are not measured on the same roof. Fixr reports $26,500 for a 2,400 sq ft steel roof (typical $14,400 to $38,400), and HomeGuide $23,800 ($7,500 to $40,000). HomeAdvisor reports $11,769 ($6,043 to $18,345) without tying it to a roof size; Angi, its parent company, lists $5,700 to $25,000. Bob Vila's $11,452 (2022) is compiled from HomeAdvisor, Fixr, HomeGuide and Modernize, so it is not an independent source. This guide uses Fixr's range because it is tied to a stated roof size.
HomeAdvisor lists $3.50 to $15 per sq ft installed for corrugated sheets and $7 to $30 for standing seam, so the ranges overlap widely; HomeGuide lists $5 to $12 and $9 to $16, and This Old House $8 to $39 for standing seam. Fixr says corrugated is the least expensive style but is usually reserved for sheds and garages because of its exposed fasteners.
"Tin" roofs today are usually light-gauge steel. Fixr lists tin at $3 to $15 per sq ft installed and steel at $6 to $16, so a 1,500 sq ft roof would run roughly $4,500 to $22,500 (calculated). Removing the old metal costs extra: Fixr's Florida page lists up to $4 per sq ft to remove heavier materials such as slate or metal.
It depends on your local code and the panel manufacturer. Fixr says it is possible but usually best to tear the old roof off and start fresh, and HomeGuide says installing over the existing roof saves time, labor and disposal fees but may add too much weight or make underlying damage unrepairable. If tear-off is required, Fixr prices it at $50 to $150 per roofing square.
HomeGuide says a metal roof takes 2 to 5 days on average, depending on the roof and crew size, the metal and the weather; its roof replacement guide gives 1 to 5 days for metal against 1 to 3 for asphalt shingles. Damage found during tear-off can add time. Much higher whole-roof cost reports are explained in our roof replacement guide.
Evidence
What supports these figures?
Each figure on this page and the published sources it is credited to. “Use with caution” marks figures we could not match to a published price. Wage, equipment and code references support only that narrower point, not an installed price.
| Estimate | Range or value | Published sources | Status |
|---|---|---|---|
| Fixr reports $14,400 to $38,400 for a 2,400 sq ft steel roof, $26,500 on average; HomeGuide reports $7,500 to $40,000 ($23,800 average). | $14,400 – $38,400 | Fixr (opens in a new tab)HomeGuide (opens in a new tab) | Source reviewed |
| HomeAdvisor lists standing seam metal roofing at $7 to $30 per sq ft installed and corrugated sheets at $3.50 to $15. | $3.50 – $30/sq ft | Angi (HomeAdvisor) (opens in a new tab) | Source reviewed |
| Fixr reports an overall average of about $11 per sq ft for metal roofing within $3 to $30, including materials and installation. | $3 – $30/sq ft (Fixr) | Fixr (opens in a new tab) | Source reviewed |
| HomeAdvisor reports a $11,769 average and a $6,043 to $18,345 typical range for metal roofs of all sizes; Fixr reports $26,500 for a 2,400 sq ft steel roof. | $6,043 – $38,400 across sources | Angi (HomeAdvisor) (opens in a new tab)Fixr (opens in a new tab) | Source reviewed |
Sources
Methodology & Data Sources
The typical range and average come from the cost publishers listed below; we compare what they publish and label figures we calculate ourselves. Bureau of Labor Statistics (BLS) wage data adjusts only the labor share when you set a ZIP code or state. Technical references support specifications, not prices.
Cost publishers · 5 independent (11 pages)
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
- 7.
- 8.
- 9.
- 10.
- 11.
Wage data and technical references
What changed
- Typical range and average re-based on Fixr's published $14,400 to $38,400 and $26,500 for a 2,400 sq ft steel roof; the previous $10,500 to $28,500 and $17,200 were not published by any source. Size table recalculated at Fixr's steel price per sq ft and labelled. Cost components now use published labor shares and tear-off prices; the unsourced code claim about installing over shingles was replaced with what Fixr and HomeGuide say.
